v Grow Tent Starter LED Kit 3.0 x 1.5 Metre - 3 x 400w LED Light Model C – growshop.co.nz

Grow Tent Starter LED Kit 3.0 x 1.5 Metre - 3 x 400w LED Light Model C - 150mm Fan & Carbon

  • $2,799.00

  • Save $397

Grow Tent Starter LED Kit 3.0 x 1.5 Metre - 3 x 400w LED Light Model C - 150mm Fan & Carbon

Kit contains:


1 x Grow Tent Hulk Silver 3000 x 1500 x 2000mm 

LED Lighting Kitset (includes light hangers)

3 x 400w 4 Bar Model C - Full spectrum LED Grow Light

Carbon Filter Kit

1 x 150mm Centrifugal Plastic Fan -800 Cubic Metres Per Hour - PK150-A

1 x Carbon Filter 150mm x 500mm -50mm Carbon Bed

1 x 150mm x 10 Metre Black Inside Foil Outer

1 x Set of 1/8 Rope Ratchet hangers for carbon filter


Timer 24 Hour Dial Manual Mechanical - 15-minute increment time setting - HPM D809
Control your equipment with this 24 hour timer - Maximum of 48 On-Off Settings every 24 Hours
15 Minute Switching increments easily settable with slide tabs 


1 x CX Coco Base Nutrients A & B 1 Litre

1 x CX Hydro Base Nutrients A & B 1 Litre

Nutrient additives

CX 250ml Sample size additives 1 each of Bio Balancer, Mighty Grow, Mighty Bloom, Regen A Root, Wilt Guard, Clone Start, Headmasta.

Additional tent information;

- Grow Tent Hulk Silver 3000 x 1500 x 2000mm 

- Heavy Duty Steel Push-Lock Corners

- 600D Mylar Fabric Strongest material on the market with highly reflective mylar inside, washable inside and outside

- Viewing window front right door 300mm x 300mm with Velcro block out cover.

- 2 x 152mm Inlet with drawstring

- 2 x 203mm Extraction Outlet with drawstring

- 2 x 152mm Cable entry with drawstring

- 2 x 152mm Inlet-Outlets for Air cooled - ducted light fittings with drawstring

- High light proofing

- Easy and quick to assemble  

- Heavy duty tubing allows for the hanging of Lights - Filters or other equipment

- Water proof internal tray

- Strong & durable light proof zip

Additional LED Lighting Kitset information;

3 sets of 400w 4 Bar Model C - Full spectrum LED Grow Light

The unit is 1120mm long x 580mm wide x 37mm deep 

Recommended mounting height of 150mm above the plant canopy

Weight 10 Kg

PPF 1000 . μmol/s

Efficacy 2.5 . μmol/j

Passive heat dissipation - no fans 

Comes with adjustable hangers

Additional Carbon Filter details;

- 800 Cubic Metre per hour Airflow 

- Highly effective, low density Australian virgin carbon

- Machine packed carbon enables 100% filtered air flow

- Inner and outer mesh provides 53% open area allowing increased air flow

- Includes changeable Velcro pre-filter

- Switchable filter flange and base for longer lifetime

- Aluminum tops and bases for reduced weight

Using only sieved and de-dusted Australian activated carbon, every batch is analysed and tested to ensure it meets 950ID or higher. All carbon particle sizes are 4/12 US mesh or larger, ensuring the highest achievable airflow ratings. Every canister is weighed after manufacture to ensure consistency with every single filter made. Expect a minimum of 2 years life and up to five years life span in low humidity environments. 

Carbon filtering is a method of filtering that uses a bed of activated carbon to remove contaminants and impurities, using chemical adsorption.

Each particle, or granule, of carbon provides a large surface area, or pore structure, allowing contaminants the maximum possible exposure to the active sites within the filter media. One gram of activated carbon has a surface area in excess of 3,000 m2 (32,000 sq ft).

Active charcoal carbon filters are most effective at removing volatile organic compounds (VOCs) Connect them to your exhaust fan, forcing all the extracted air from your grow room to pass through the filter.

A carbon filter has the ability to literally scrub the smell from the air. Therefore, when a smell passes through the carbon, it is completely neutralized. In fact, the filter is capable of not only removing smells, but will also remove other impurities from the air.