Climate Fan Twin Speed Thermostatic Temperature Digital Controller
Climate Fan Twin Speed Thermostatic Temperature Digital Controller for inlet and outlet Fans
The Thermostatic Controller will keep your fan speeds as constant as possible once it has found its balance while maintaining the pre-set temperature.
The internal functions built into this controller will learn overtime the best way to control your pre-set target temperature. The unit settles usually below your fans maximum operating speed, if you have selected the correct fans for your area.
Once settles this allows your fans to run at maximum efficiency in power usage versus output performance required
The Sockets on the controller are clearly marked for Exhaust and Intake Fans to be plugged into.
The Idle speed knob is adjustable between 20% and 60%. This knob sets the minimum speed that both fans will attain when the temperature is below the user pre-set temperature setting.
Temperature knob is used to set the temperature required to be maintained in your area.
Balance Knob Adjusts the differential between the intake fan and the exhaust fan. This is a great tool for getting the correct balance when using similar rated-size fans. Remember choosing the correct size fans for the area is also very important.
The display shows the target temperature and the humidity level the sensor detects
The LED indicator is visible on the display when the unit is maintaining and controlling the temperature
Built in resettable overload circuit breaker
The unit can be set up outside your grow environment it will be controlled via a remote probe temperature sensor. Ensure you place the sensor in a sensible position within your environment as this is sending the information to your controller which in turn is setting the speed that your fans will run at.
Please Note this controller is not suitable for use with EC digital fans