v Kit Carbon Filter 125mm x 300mm, 10 Metre Ducting & 125mm Inline Plast – growshop.co.nz

Kit Carbon Filter 125mm x 300mm, 10 Metre Ducting & 125mm Inline Plastic Tube Fan

  • $219.00

  • Save $43


Kit Carbon Filter 125mm x 300mm, 10 Metre Ducting & 125mm Inline Plastic Tube Fan

1 x 125mm Inline Plastic Tube Fan - 310 Cubic Metres Per Hour

1 x Carbon Filter 125mm x 300mm - 35mm Carbon Bed - No1 Grade 4/8 Australian Carbon

1 x Ducting 125mm x 10 Metres -Black inside Foil outer

Carbon Filter details

Pro Grow Carbon Filter 125mm x 300mm - 35mm Carbon Bed - No1 grade 4/8 Australian Carbon

- 425 Cubic Metre per hour Airflow 

- Highly effective, low density Australian virgin carbon

- Machine packed carbon enables 100% filtered air flow

- Inner and outer mesh provides 53% open area allowing increased air flow

- Unique dust atracting black pre-filter sock is included and comes with two easy-to-fit elastic pre-filter straps. This should be washed periodically to maintain the filters life 

- Black powder coated top flange and base

- Switchable filter flange and base for longer lifetime

Using only sieved and de-dusted Australian activated carbon, every batch is analysed and tested to ensure it meets 950ID or higher. All carbon particle sizes are 4/12 US mesh or larger, ensuring the highest achievable airflow ratings. Every canister is weighed after manufacture to ensure consistency with every single filter made. Expect a minimum of 2 years life and up to five years life span in low humidity environments. 

Carbon filtering is a method of filtering that uses a bed of activated carbon to remove contaminants and impurities, using chemical adsorption.

Each particle, or granule, of carbon provides a large surface area, or pore structure, allowing contaminants the maximum possible exposure to the active sites within the filter media. One gram of activated carbon has a surface area in excess of 3,000 m2 (32,000 sq ft).

Active charcoal carbon filters are most effective at removing volatile organic compounds (VOCs) Connect them to your exhaust fan, forcing all the extracted air from your grow room to pass through the filter.

A carbon filter has the ability to literally scrub the smell from the air. Therefore, when a smell passes through the carbon, it is completely neutralized. In fact, the filter is capable of not only removing smells, but will also remove other impurities from the air.

Don’t be fooled by cheap copies ensure you use only the highest grade 4/8 Australian Carbon. Progrow carbon has been independently Analysed in a laboratory before the filter is manufactured to ensure it has a minimum 20% butane absorption and will provide the lightest least restrictive air flow and also deliver maximum impurity filtration.

About the fan

Mixed flow fans allow air to flow in axial and radial direction in relation to the shaft. These powerful inline mixed flow fans have been designed to produce higher working pressures for applications that require higher airflows These fans are widely used in many applications, It is common to find them on duct systems, which are characterized by high pressure, good air flow with low relative noise levels. These fans are mountable at the beginning, the middle and the end of the duct system. Installation of this type of fan is simple, and so is the removal.

Please Note: This Mixed Flow model Fan is not suitable for use with a Fan speed controller