Grow Tent Starter Model X 350w LED Kit 1.2 Metre - Model X 350w LED Light - 125mm Fan & Carbon
Grow Tent Starter Model X 350w LED Kit 1.2 Metre - Model X 350w LED Light - 125mm Fan & Carbon
Kit contains:
Tent
1 x Grow Tent Hulk Silver 1200 x 1200 x 2000mm
LED Lighting Kitset (includes light hangers)
1 x 350w Model X Full Spectrum LED Grow Light
Carbon Filter Kit
1 x 125mm Centrifugal Plastic Fan -420 Cubic Metres Per Hour - PK125-L
1 x Carbon Filter 125mm x 500mm - 35mm Carbon Bed
1 x 125mm x 10 Metre Black Inside Foil Outer
1 x Set of 1/8 Rope Ratchet hangers for carbon filter
Timer
Timer 24 Hour Dial Manual Mechanical - 15-minute increment time setting - HPM D809
Control your equipment with this 24 hour timer - Maximum of 48 On-Off Settings every 24 Hours
15 Minute Switching increments easily settable with slide tabs
Nutrient
1 x CX Coco Base Nutrients A & B 1 Litre
1 x CX Hydro Base Nutrients A & B 1 Litre
Nutrient additives
CX 250ml Sample size additives 1 each of Bio Balancer, Mighty Grow, Mighty Bloom, Regen A Root, Wilt Guard, Clone Start, Headmasta.
Additional tent information;
- Grow Tent Hulk Silver 1200 x 1200 x 2000mm
- Heavy Duty Steel Push-Lock Corners
- 600D Mylar Fabric Strongest material on the market with highly reflective mylar inside, washable inside and outside
- Viewing window front right door 300mm x 300mm with Velcro block out cover.
- 1 x 152mm Inlet with drawstring
- 1 x 152mm Extraction Outlet with drawstring
- 1 x 152mm Cable entry with drawstring
- 2 x 152mm Inlet-Outlets for Air cooled - ducted light fittings with drawstring
- High light proofing
- Easy and quick to assemble
- Heavy duty tubing allows for the hanging of Lights - Filters or other equipment
- Water proof internal tray
- Strong & durable light proof zip
Additional LED Lighting Kitset information;
350w Model X Full Spectrum 6 Bar LED Grow Light
The unit is 560mm long x 585mm wide x 100mm deep
Recommended mounting height of 150mm above the plant canopy
Dimmable Settings 150w - 220w - 290w - 350w - unit can also be connected to an external 0-10v controller
PPF 860 . μmol/s
Efficacy 2.45 . μmol/j
Passive heat dissipation - no fans
Colour rendering 90ra
Philips LUMILED Chips
Additional Carbon Filter details;
- 663 Cubic Metre per hour Airflow
- Highly effective, low density Australian virgin carbon
- Machine packed carbon enables 100% filtered air flow
- Inner and outer mesh provides 53% open area allowing increased air flow
- Includes changeable Velcro pre-filter
- Switchable filter flange and base for longer lifetime
- Aluminum tops and bases for reduced weight
Using only sieved and de-dusted Australian activated carbon, every batch is analysed and tested to ensure it meets 950ID or higher. All carbon particle sizes are 4/12 US mesh or larger, ensuring the highest achievable airflow ratings. Every canister is weighed after manufacture to ensure consistency with every single filter made. Expect a minimum of 2 years life and up to five years life span in low humidity environments.
Carbon filtering is a method of filtering that uses a bed of activated carbon to remove contaminants and impurities, using chemical adsorption.
Each particle, or granule, of carbon provides a large surface area, or pore structure, allowing contaminants the maximum possible exposure to the active sites within the filter media. One gram of activated carbon has a surface area in excess of 3,000 m2 (32,000 sq ft).
Active charcoal carbon filters are most effective at removing volatile organic compounds (VOCs) Connect them to your exhaust fan, forcing all the extracted air from your grow room to pass through the filter.
A carbon filter has the ability to literally scrub the smell from the air. Therefore, when a smell passes through the carbon, it is completely neutralized. In fact, the filter is capable of not only removing smells, but will also remove other impurities from the air.