315mm Centrifugal Blueline Prima Klima - 3200 Cubic Metres per hour PK300/315

315mm Centrifugal Blueline Prima Klima - 3200 Cubic Metres per hour PK300/315

  • $1,189.00



315mm - 300mm Centrifugal Blueline Prima Klima - 3200 Cubic Metres per hour PK300/315

3200 Cubic Metres per hour

889 Litres per second

290w European motor 

Weight: 14.20 Kg

Measures 522mm Long x 470mm High

The Prima Klima BLUE LINE PK300/315 is equipped with highly efficient German Ziehl-Abegg motor with incredible Airflow of 3200m³/h and a pressure build-up of up to 650Pa with only 290W and just 1350 rev/min. The Blue Line ventilator is built for continuous non-stop operation with a rated life of 80.000 hours at full speed. The centrifugal fan can operate at low noise levels considering its high volume air power - rated at 68dB.

It surpasses by far the European ERP2015 Energy Efficiency Directive.

Power and control systems are located in a high quality junction box fully assembled with a power cable Pre-installed, robust mounting brackets allow easy installation in any position.

Features:

- ZIEHL-ABEGG motor/impeller

- Low noise emissions (68dB)

- Non-stop operation, over 80.000 hours

- Can be used with a Speed controller

- Thermal circuit breaker

The Prima Klima Blue Line PK300/315 is a highly efficient inline duct fan equipped with a Ziehl - Abegg European motor & impeller. Maintenance free long lasting ball bearings contribute to especially smooth running of the motor. The control system, the connections and the capacitor are fully integrated into the housing. With the use of the supplied mounting bracket the fan can be easily and safely attached to the wall or ceiling in any position. The fan can be further controlled via a speed controller (Purchased separately) this can then be used to slow the amount of air moved.

Centrifugal fans are a mechanical device for moving air. Centrifugal fans often contain a ducted housing to direct outgoing air in a specific direction these fans increase the speed and volume of an air stream with the rotating impellers. 

Centrifugal fans use the kinetic energy of the impellers to increase the volume of the air stream, which in turn moves against the resistance caused by ducts, dampers and other components. Centrifugal fans displace air radially. They are sturdy, quiet, reliable, and capable of operating over a wide range of conditions.

Centrifugal fans are constant-displacement or constant-volume devices, meaning that, at a constant fan speed, a centrifugal fan moves a relatively constant volume of air rather than a constant mass. This means that the air velocity in a system is fixed even though the mass flow rate through the fan is not. Centrifugal fans are not positive displacement devices and centrifugal fans have certain advantages and disadvantages when contrasted with positive-displacement blowers, Centrifugal fans are more efficient, whereas positive-displacement blowers may have a lower capital cost.

The Centrifugal fan is one of the most widely used fans. Centrifugal fans are by far the most prevalent type of fan used in the HVAC industry today. They are used in transporting gas or materials and in ventilation systems for buildings and vehicles. They are also well-suited for industrial processes and air pollution control systems.