v 250mm Centrifugal Plastic RKW Temp & Speed adjustable Can-Fan – growshop.co.nz
250mm Centrifugal Plastic RKW Temp & Speed adjustable Can-Fan

250mm Centrifugal Plastic RKW Temp & Speed adjustable Can-Fan

  • $429.00



250mm Centrifugal Plastic RKW Temp & Speed adjustable Can-Fan

840 Cubic Metres per hour

Can-Fan RKW plastic tube fan, is a backward centrifugal extractor, using a resistant plastic housing.

Equipped with an electronic control of the airflow: once the temperature is set using the rotating switch, a sensor will increase the speed if the temperature is above the selected one with 1°C and decrease if the temperature drops below the selected one with 1°C.

Speed control is achieved by winding taps, therefore causing no noise.

The Swiss made motor has an integrated thermal switch.

Centrifugal fans are a mechanical device for moving air. Centrifugal fans often contain a ducted housing to direct outgoing air in a specific direction these fans increase the speed and volume of an air stream with the rotating impellers.

Centrifugal fans use the kinetic energy of the impellers to increase the volume of the air stream, which in turn moves against the resistance caused by ducts, dampers and other components. Centrifugal fans displace air radially. They are sturdy, quiet, reliable, and capable of operating over a wide range of conditions.

Centrifugal fans are constant-displacement or constant-volume devices, meaning that, at a constant fan speed, a centrifugal fan moves a relatively constant volume of air rather than a constant mass. This means that the air velocity in a system is fixed even though the mass flow rate through the fan is not. Centrifugal fans are not positive displacement devices and centrifugal fans have certain advantages and disadvantages when contrasted with positive-displacement blowers, Centrifugal fans are more efficient, whereas positive-displacement blowers may have a lower capital cost.

The Centrifugal fan is one of the most widely used fans. Centrifugal fans are by far the most prevalent type of fan used in the HVAC industry today. They are used in transporting gas or materials and in ventilation systems for buildings and vehicles. They are also well-suited for industrial processes and air pollution control systems.