{"title":"Hydroponic pH Adjustment \u0026 Calibration Solutions, Air \u0026 Water Pumps, Water Heaters \u0026 Components","description":"\u003cp\u003e\u003cspan\u003eHydroponics gives you complete control over your plant’s nutrition, water delivery, and root‑zone environment — and the right equipment makes all the difference. Our range is designed to help growers of every level achieve faster growth, bigger yields, and cleaner, more efficient operation.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"air-pump-160-litres-per-hour-1-outlet-aquaone-precision-2500","title":"Air Pump 160 Litres Per Hour 1 Outlet - Aquaone Precision 2500","description":"\u003cp\u003eAir pumps improve hydroponic system aeration performance and overall water quality by increasing water flow which helps to eliminate localised build-up of nutrients and additives. This makes for happy and healthy plants.\u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp\u003eHigh quality robust units that have been built to last with near silent operation. Simple diaphragm replacement can be achieved if required\u003c\/p\u003e\n\u003cp\u003eOutlet suits standard 4mm airline tubing\u003c\/p\u003e\n\u003cp\u003eDecide where you are going to position the air pump. Remember the pump must remain accessible for maintenance and avoid placing the pump on a carpeted surface. Where possible place the pump above the reservoir, If this is not possible then ensure that a check valve (sold separately) is fitted to the airline, failure to do so may damage your air pump \u0026amp; void your Guarantee. Ensure the check valve is inserted correctly, they only flow one way. Attach one end of the air line into your air stone and the other into the outlet of your pump.\u003c\/p\u003e\n\u003cp\u003eEnsure the pump is not going to vibrate off what ever surface you place it on.\u003c\/p\u003e\n\u003cp\u003eRemember to arrange a drip loop.\u003c\/p\u003e\n\u003cp\u003eIt is essential to replace the air stone regulary every 6 months or when it shows signs of deterioration. If being used in salt water a ceramic air stone is recommended.\u003c\/p\u003e\n\u003cp\u003eProblem solving if the Pump does not work:\u003c\/p\u003e\n\u003cp\u003eEnsure the plug is inserted correctly and the switch is in the on position and also your power outlet does have power and a circuit breaker hasn't been triggered.\u003c\/p\u003e\n\u003cp\u003eIf the pump motor is working but there is no air coming out of the pump or the pump is very noisy. Check that the air line is not kinked, Check the air stone and replace if needed. There is a rubber diaphragm inside the pump which may have warn out and may require replacing.\u003c\/p\u003e\n\u003cp\u003eThis unit uses 2.5 watts of power\u003c\/p\u003e\n\u003cp\u003eIs it a good idea to aerate the nutrient solution?\u003c\/p\u003e\n\u003cp\u003eYes, especially when solution temperatures start to rise during the warmer months as warm water can’t retain as much dissolved oxygen as cool water. \u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":39217421325,"sku":"9325136000009","price":18.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirPump160Litre-Hour1Outlet-AquaonePrecision250.png?v=1731725153"},{"product_id":"nftcapillarycloth150mmwidepermetre","title":"NFT Capillary Hydroponic Cloth 150mm Wide Per Metre","description":"\u003cp\u003eNFT Hydro capillary cloth is a specialized material used in Nutrient Film Technique (NFT)\u003cspan\u003e hydroponic systems.\u003c\/span\u003e This capillary cloth is essential for maintaining an even distribution of nutrient rich water, which is crucial for the success of your hydroponic system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be placed inside NFT gullies to help distribute the flow of nutrient-rich water evenly across the base of your plants. This ensures better absorption into the growing medium, promoting healthier plant growth\u003c\/li\u003e\n\u003cli\u003e150mm wide, made from a durable, absorbent fabric that can withstand constant exposure to water and nutrients\u003c\/li\u003e\n\u003cli\u003eSold per metre, allowing you to purchase the exact length needed for your setup\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic Brand","offers":[{"title":"Default Title","offer_id":39218692621,"sku":"HG0200","price":1.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/NFTCapillaryCloth150mm.png?v=1780480246"},{"product_id":"conductivity-test-solution-ec-277-or-cf-277-250ml-bluelab","title":"Conductivity Test Solution EC 2.77 or CF 27.7 - 250ml - bluelab ®","description":"\u003cp\u003eEssential growers test solution for CF, EC \u0026amp; PPM nutrient meters accuracy. Most of bluelab’s CF \u0026amp; EC test equipment does not need calibrating as they are all factory calibrated except for the EC pen. This 2.77 EC solution is generally used as a reference check to ensure you have adequately cleaned the EC, CF or PPM probe and your meter is providing an accurate reading. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ebluelab solutions are manufactured to very high standards and National Institute of Standards and Technology (NIST) certified this traceable standard ensures your equipment lasts longer and maintains accuracy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvoid cross-contamination\u003c\/li\u003e\n\u003cli\u003eDecanter into a smaller plastic cup\u003c\/li\u003e\n\u003cli\u003eDiscard sample after use\u003c\/li\u003e\n\u003cli\u003eStore in a cool dark place\u003c\/li\u003e\n\u003cli\u003eStore with lid secured tightly\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"bluelab","offers":[{"title":"Default Title","offer_id":39219001549,"sku":"9421024920296","price":17.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/ConductivitystandardtestsolutionEC2.77orCF27.7-250mlbluelab.png?v=1722990252"},{"product_id":"cf-truncheon-0-36-cf-ec-nutrient-meter-bluelab","title":"CF Truncheon 0 - 36 CF \u0026 EC Nutrient Meter - bluelab ®","description":"\u003cp\u003e\u003cspan\u003ebluelab Truncheon meter renowned as the best conductivity meter by growers for decades. This brilliantly simple, bullet proof hydroponic nutrient meter allows you to measure and adjust nutrient levels for optimal plant performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-content-type=\"heading\" data-appearance=\"default\" data-element=\"main\"\u003e\u003cstrong\u003eBuilt for growers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eDesigned with growers, for growers - so you can be confident that the bluelab Truncheon can withstand the knocks and drops that come with everyday growing. Designed and assembled in New Zealand from local and imported components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpossibly tough CF - EC meter built to last a lifetime   \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"ui-provider fz b c d e f g h i j k l m n o p q r s t u v w x y z ab ac ae af ag ah ai aj ak\" dir=\"ltr\"\u003eMeasure up to 3.6 EC, 36 CF, 1800 ppm 500 (TDS) or 2520 ppm 700\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eRobust and reliable construction for long lasting value\u003c\/li\u003e\n\u003cli\u003eFully waterproof; splash, submerge or sink\u003c\/li\u003e\n\u003cli\u003eAutomatically detects liquids and bright LEDS indicate measurement for brilliantly simple functionality\u003c\/li\u003e\n\u003cli\u003eLong mixing stick design for mixing and measuring nutrient reservoirs simultaneously, meter length 400mm\u003c\/li\u003e\n\u003cli\u003eNo calibration required and easy to clean and disinfect\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAutomatic Temperature Compensation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eAuto On\/Off function\u003c\/li\u003e\n\u003cli\u003eBattery operated 3 x AA batteries included\u003c\/li\u003e\n\u003cli\u003ebluelab industry leading five year warranty for peace of mind. \u003cspan\u003e5 year limited written warranty, Proof of purchase required for full terms and conditions visit \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.bluelab.com\/product-warranty?_gl=1*gqiuh0*_gcl_au*OTQxMDYyMTY0LjE3NTAyOTc4Mzg.*_ga*MTI1NDU4ODg2Ni4xNzI0MDI4ODY0*_ga_HCXKZL6YM3*czE3NTAzMDA1NDckbzEyJGcxJHQxNzUwMzAwNTUwJGo1NyRsMCRoMA..\" target=\"_blank\" rel=\"noopener\"\u003ebluelab.com\/product-warranty\u003c\/a\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eEach time you feed your plants it’s essential to know the nutrient levels of your solution. Simply done with the Bluelab® Truncheon® nutrient meter. Flashing lights indicate your conductivity reading, which is automatically compensated with the integrated temperature sensor. Removable shroud for easy cleaning. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDon't\u003c\/strong\u003e test the Truncheon Meter in plain tap water with no nutrient formula added to it, the water can be too clean to actually register on the units EC probe so the unit will not power up. Always test with bluelab 27.7 Conductivity calibration test fluid for accurate results\u003cspan style=\"font-family: Verdana, sans-serif; font-size: 8.5pt;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: Verdana, sans-serif; font-size: 8.5pt;\"\u003e\u003ciframe width=\"1310\" height=\"737\" src=\"https:\/\/www.youtube.com\/embed\/GUTyR8Qv2CI\" title=\"The Bluelab Nutrient Meters - Conductivity (EC, CF, PPM)\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"bluelab","offers":[{"title":"Default Title","offer_id":39219008589,"sku":"9421024920012","price":189.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/BL_Image-Product_Truncheon_Meter_1__png.png?v=1729652397"},{"product_id":"combo-meter-standard-version-ph-cf-ec-and-temp-bluelab","title":"Combo Meter Standard Version pH, CF \/ EC and Temp - bluelab ®","description":"\u003cp\u003ebluelab Combo Meter is a portable pH tester, conductivity and temperature meter all in one. If you are experiencing problems with yellow leaves, or slow stunted growth, the Bluelab Combo Meter will soon tell you if each parameter is within the plants requirements. Adjustments can be quickly made to get your crop back on track.\u003cbr\u003e\u003cbr\u003eThe Bluelab Combo Meter has two probes, a Bluelab pH Probe and a Bluelab Conductivity\/Temperature Probe. When taking a reading, simply place them into the solution and the selected reading is displayed on screen. As the Bluelab Combo Meter is portable and does not require a power supply to operate, it can be used anywhere, anytime to help you manage your crops’ daily nutrient requirements.\u003cbr\u003e\u003cbr\u003eCalibration of the pH probe is simple as instructions are supplied on the back of the meter and the easy push button method makes this one of the simplest meters to use.\u003cbr\u003e\u003cbr\u003eThe pH probe is replaceable so you can use this meter for years to come. The Conductivity\/temperature probe does not require calibration as this is locked in during manufacture.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures pH, conductivity \/ nutrient (EC, CF, ppm 500 and ppm 700) and temperature (°C, °F)\u003c\/li\u003e\n\u003cli\u003eLightweight and portable\u003c\/li\u003e\n\u003cli\u003eLarge easy to read display\u003c\/li\u003e\n\u003cli\u003eSimple push button pH calibration\u003c\/li\u003e\n\u003cli\u003eSuccessful pH calibration indicator\u003c\/li\u003e\n\u003cli\u003eNo calibration required for conductivity and temperature\u003c\/li\u003e\n\u003cli\u003eReplaceable double junction pH probe included\u003c\/li\u003e\n\u003cli\u003eOver range and under range indicators\u003c\/li\u003e\n\u003cli\u003eLow battery indicator\u003c\/li\u003e\n\u003cli\u003e2 x AAA alkaline batteries included\u003c\/li\u003e\n\u003cli\u003eAuto off function\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"bluelab","offers":[{"title":"Default Title","offer_id":39219030733,"sku":"9421024920036","price":489.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/BL_Image_Bluelab-Combo-Meter-METCOM_1_WEB.jpg?v=1729647599"},{"product_id":"ec-pen-conductivity-temperature-meter-bluelab","title":"EC Pen -  Conductivity  \u0026  Temperature Meter - bluelab ®","description":"\u003cp\u003eBluelab EC pen is the ultimate solution for measuring conductivity. The Bluelab® Conductivity Pen simply tells you the amount of nutrient in your solution. Conductivity is automatically compensated with the integrated temperature sensor. Providing a compact, quick and accurate way to measure two key parameters for crop health. Teamed with the Bluelab® pH Pen you have a robust, convenient and accurate measurement system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.0 – 10.0 EC or 0 – 100 CF\u003c\/li\u003e\n\u003cli\u003eMeasures conductivity and temperature\u003c\/li\u003e\n\u003cli\u003eSelectable units for conductivity and temperature\u003c\/li\u003e\n\u003cli\u003eShows conductivity scales CF, EC, PPM 500 \u0026amp; PPM 700 at the touch of a button\u003c\/li\u003e\n\u003cli\u003eFully waterproof\u003c\/li\u003e\n\u003cli\u003eBacklit LCD display\u003c\/li\u003e\n\u003cli\u003eCalibration optional\u003c\/li\u003e\n\u003cli\u003eSuccessful 30 day calibration indicator\u003c\/li\u003e\n\u003cli\u003eHold reading function\u003c\/li\u003e\n\u003cli\u003eLow battery indicator\u003c\/li\u003e\n\u003cli\u003eAuto off function\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation\u003c\/li\u003e\n\u003cli\u003eAAA replaceable battery included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePackaged Weight: 0.134 kg\u003c\/p\u003e\n\u003cp\u003ePackaged Length: 205 mm \u003c\/p\u003e\n\u003cp\u003ePackaged Width: 55 mm \u003c\/p\u003e\n\u003cp\u003ePackaged Height: 32 mm \u003c\/p\u003e","brand":"bluelab","offers":[{"title":"Default Title","offer_id":39219061773,"sku":"9421024920227","price":149.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/ECPenbluelab.png?v=1715632331"},{"product_id":"ph4calibrationsolution250mlbluelab","title":"pH 4 Calibration Solution 250ml - bluelab ®","description":"\u003cp\u003eEssential growers solution for use with all pH test equipment requiring calibration like bluelab pH meters, pH probes and any brand that needs calibration. \u003cspan\u003ebluelab solutions are manufactured to very high standards and National Institute of Standards and Technology (NIST) certified this traceable standard ensures your equipment lasts longer and maintains accuracy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e: pH measuring equipment is always calibrated to pH 7.0 \u003cstrong\u003efirst \u003c\/strong\u003e(buffer) then to pH 4.0 (slope) \u003cstrong\u003esecond.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvoid cross-contamination\u003c\/li\u003e\n\u003cli\u003eDecanter into a smaller plastic cup\u003c\/li\u003e\n\u003cli\u003eDiscard sample after use\u003c\/li\u003e\n\u003cli\u003eStore in a cool dark place\u003c\/li\u003e\n\u003cli\u003eStore with lid secured tightly\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"bluelab","offers":[{"title":"Default Title","offer_id":39219275597,"sku":"9421024920289","price":17.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/pH4CalibrationSolution250mlbluelab_6ac4e932-50fd-47d9-9df9-ab2d076cc6bd.png?v=1722990315"},{"product_id":"ph7calibrationsolution250mlbluelab","title":"pH 7 Calibration Solution 250ml - bluelab ®","description":"\u003cp\u003eEssential growers solution for use with all pH test equipment requiring calibration like bluelab pH meters, pH probes and any brand that needs calibration. \u003cspan\u003ebluelab solutions are manufactured to very high standards and National Institute of Standards and Technology (NIST) certified this traceable standard ensures your equipment lasts longer and maintains accuracy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e: pH measuring equipment is always calibrated to pH 7.0 \u003cstrong\u003efirst \u003c\/strong\u003e(buffer) then to pH 4.0 (slope) \u003cstrong\u003esecond.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvoid cross-contamination\u003c\/li\u003e\n\u003cli\u003eDecanter into a smaller plastic cup\u003c\/li\u003e\n\u003cli\u003eDiscard sample after use\u003c\/li\u003e\n\u003cli\u003eStore in a cool dark place\u003c\/li\u003e\n\u003cli\u003eStore with lid secured tightly\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"bluelab","offers":[{"title":"Default Title","offer_id":39219277517,"sku":"9421024920272","price":17.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/pH7CalibrationSolution250mlbluelab_76acaa86-3fe5-4d44-9f34-099ce3f0d80b.png?v=1722990380"},{"product_id":"ph-pen-ph-and-temperature-meter-bluelab","title":"pH Pen - pH and Temperature Meter - bluelab ®","description":"\u003cp\u003epH Pen bluelab the ultimate solution for measuring pH, perfect for quick and easy pH and temperature readings direct from your solution. The Bluelab® pH Pen is the preferred option for hand held pH meters. It provides a compact, quick and handy way to manage the success of your crops to ensure maximum uptake of nutrients. A key parameter that affects nutrient uptake is whether your solution is acid or alkaline. We measure this in pH. Teamed with our Bluelab® Conductivity Pen you have a robust, convenient and accurate measurement system \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures pH 0.0 – 14.0 and temperature 0 – 50 ̊C \/ 32 – 122 ̊F\u003c\/li\u003e\n\u003cli\u003eSelectable units for temperature\u003c\/li\u003e\n\u003cli\u003eFully waterproof • Backlit LCD display\u003c\/li\u003e\n\u003cli\u003eDouble junction probe (not replaceable)\u003c\/li\u003e\n\u003cli\u003eSimple two point calibration process with 30 day calibration indicator\u003c\/li\u003e\n\u003cli\u003eHold reading function\u003c\/li\u003e\n\u003cli\u003eLow battery indicator\u003c\/li\u003e\n\u003cli\u003eAuto off function\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation\u003c\/li\u003e\n\u003cli\u003eAAA replaceable battery included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"bluelab","offers":[{"title":"Default Title","offer_id":39219289805,"sku":"9421024920234","price":155.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/PHPENBLUELAB_c1183d87-11b7-4924-82de-5d1f0f59b41c.png?v=1778621102"},{"product_id":"phprobereplacement-bluelab","title":"pH Probe Replacement - bluelab ®","description":"\u003cp\u003eThe Bluelab pH Probe is a replacement pH probe (electrode) suitable for use with Bluelab products that test the pH value of a solution.\u003cbr\u003e \u003cbr\u003eUnfortunately pH Probes do not last forever as they age through normal use and will eventually fail. With good care and use (keeping the probe tip wet and cleaning once a month) you will extend its life.\u003cbr\u003e \u003cbr\u003eThe Bluelab pH Probe has a double junction reference which provides a longer life than many other pH probes and is a gel filled non-refillable probe, so apart from cleaning is maintenance free.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to clean\u003c\/li\u003e\n\u003cli\u003eGel filled (non-refillable), low maintenance\u003c\/li\u003e\n\u003cli\u003eDouble junction\u003c\/li\u003e\n\u003cli\u003eWaterproof cable joint\u003c\/li\u003e\n\u003cli\u003eProbe holder included – keeps probe secure\u003c\/li\u003e\n\u003cli\u003eQuality BNC connection with 2 metre standard connection cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"bluelab","offers":[{"title":"Default Title","offer_id":39219301133,"sku":"9421024920043","price":129.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/pHProbeReplacement-bluelab.png?v=1715627381"},{"product_id":"water-pump-1300-moray-1100-litres-per-hour-14m-mhh","title":"Water Pump 1300 Moray -1100 Litres Per Hour - 1.4 metre max head height","description":"\u003cp\u003e\u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e Water pumps provide excellent water circulation and aeration in any Hydroponic system, Custom Irrigation systems, Aquaponics, Aquariums, Ponds, Fountains \u0026amp; Waterfalls. Energy efficient, quiet operation, reliable and versatile. Fully submersible oil free motor ensures no toxic chemicals are released into the reservoir. These multipurpose submersible pumps can also be used for running water anywhere it needs to be pumped. Easily taken apart for cleaning, ensuring hassle-free upkeep. \u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e pumps are available in a range of sizes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt with salt resistant materials - Can be \u003cspan\u003eused in fresh or salt water \u003c\/span\u003e\u003cspan\u003ecorrosive environments\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePump uses 14.6 watts of power\u003c\/li\u003e\n\u003cli\u003ePump maximum flow rate 1100 Litres Per Hour at pump outlet\u003c\/li\u003e\n\u003cli\u003ePump maximum head height 1.4 metres\u003c\/li\u003e\n\u003cli\u003e19mm Pump outlet hose connection \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the pumps are being used in salt water, they must be checked regularly for build-up of calcium and other deposits. To maximise the life of your pump, it is recommended to clean the pump casing and the impeller every 6 - 8 weeks or earlier if flow has decreased significantly. Prior to cleaning, disconnect the pump from the electrical power supply. The casing of the pump and the strainer can be cleaned with a firm brush\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43605651661,"sku":"9325136029253","price":59.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/WaterPump1300Moray-1100LitresPerHour1.4mMh_h.png?v=1715627851"},{"product_id":"water-pump-2300-moray-2200-litres-per-hour-22m-mhh","title":"Water Pump 2300 Moray -2200 Litres Per Hour - 2.2 metre max head height","description":"\u003cp\u003e\u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e Water pumps provide excellent water circulation and aeration in any Hydroponic system, Custom Irrigation systems, Aquaponics, Aquariums, Ponds, Fountains \u0026amp; Waterfalls. Energy efficient, quiet operation, reliable and versatile. Fully submersible oil free motor ensures no toxic chemicals are released into the reservoir. These multipurpose submersible pumps can also be used for running water anywhere it needs to be pumped. Easily taken apart for cleaning, ensuring hassle-free upkeep. \u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e pumps are available in a range of sizes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt with salt resistant materials - Can be \u003cspan\u003eused in fresh or salt water \u003c\/span\u003e\u003cspan\u003ecorrosive environments\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePump uses 30 watts of power\u003c\/li\u003e\n\u003cli\u003ePump maximum flow rate 2200 Litres Per Hour at pump outlet\u003c\/li\u003e\n\u003cli\u003ePump maximum head height 2.2 metres\u003c\/li\u003e\n\u003cli\u003e19mm Pump outlet hose connection \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the pumps are being used in salt water, they must be checked regularly for build-up of calcium and other deposits. To maximise the life of your pump, it is recommended to clean the pump casing and the impeller every 6 - 8 weeks or earlier if flow has decreased significantly. Prior to cleaning, disconnect the pump from the electrical power supply. The casing of the pump and the strainer can be cleaned with a firm brush\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43605908301,"sku":"9325136029277","price":90.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/WaterPump2300Moray-2200LitresPerHour2.2mMh_h.png?v=1715643924"},{"product_id":"water-heater-200w-thermosafe-aquaone","title":"Water Heater 200w Thermosafe - Aquaone","description":"\u003cp\u003eMaintaining water temperature is an essential requirement for keeping hydroponic plants happy and healthy. Aqua One ThermoSafe heaters are made from high quality quartz which makes them durable and shatter resistant. The thermal cut out protection safeguards the heater from damage if accidentally exposed to water shortage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple to use, with an easy to read temperature guide, Aqua One ThermoSafe heaters are the optimum choice for your reservoir\u003c\/li\u003e\n\u003cli\u003eHigh quality heater with shatter resistant Quartz glass and Microchip controlled thermal cut-off\u003c\/li\u003e\n\u003cli\u003eFully submersible with simple installation with suction cups provided and Easy to read temperature guide Indicator light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect the proper wattage heater for your reservoir, normally 1 watt will heat 1 litre of water. For example a 200W heater is required for a 180 to 200L reservoir.\u003c\/p\u003e\n\u003cp\u003ePosition the heater in the reservoir the best position is near a strong water flow. Use the suction caps provided to fasten the heater to the reservoir. Suction caps should be positioned on the top third of the heater not on the heating element. Do not plug the heater in unless submersed in water.\u003c\/p\u003e\n\u003cp\u003eAlways allow 10-15 minutes for the heater to acclimate to the reservoir temperature before plugging the unit in.\u003c\/p\u003e\n\u003cp\u003ePlug the power cord into the power socket and arrange a “drip loop” and turn on.\u003c\/p\u003e\n\u003cp\u003eTo set the heater, use the control knob at the top of the heater to adjust to the desired temperature. Continue turning the knob until the preferred temperature is displayed in the window on the front of the heater.\u003c\/p\u003e\n\u003cp\u003eA light will come on when the heater is working, It will switch off when it reaches the set temperature.\u003c\/p\u003e\n\u003cp\u003eYou can confirm your set temperature with an accurate thermometer. The thermometer should be placed at the opposite end of the reservoir to the heater. A small variation between the heater’s set temperature and the thermometers reading is normal.\u003c\/p\u003e\n\u003cp\u003eAlways disconnect the heaters power supply prior to working on the reservoir hardware\u003c\/p\u003e\n\u003cp\u003eIf removing the heater from the reservoir, turn it off at the power supply, wait 5-10 minutes to allow it to cool, and then remove it.\u003c\/p\u003e\n\u003cp\u003eIf the heater is cracked and\/or has moisture inside it, turn the power off at the main power supply, unplug the unit and remove it from the reservoir.\u003c\/p\u003e\n\u003cp\u003eDo not operate your Aqua One heater when it is not submerged in water. The water level must be maintained at the minimum water level line at all times.\u003c\/p\u003e\n\u003cp\u003eWhat temperature should my nutrient solution be?\u003c\/p\u003e\n\u003cp\u003eThe best temperature is between 18°C and 22°C. Any lower and growth will slow down and any higher and you will start to deprive the solution of oxygen. During summer, it is sometimes difficult to keep temperatures low enough. Generally, you will need to aerate the solution if the water temperature gets too high. The absolute maximum solution temperature is 32°C. Above this and the plant will begin to suffer. During winter, in most places, heating the solution is necessary\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43605913933,"sku":"9325136043952","price":47.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/200wWaterHeaterThermosafeAquaone_2.png?v=1719953099"},{"product_id":"water-heater-glass-200w-275mm-long-aquaone","title":"Water Heater Glass 200w - 275mm Long  Aquaone","description":"\u003cp\u003eMaintaining correct water temperature is an essential requirement for keeping hydroponic plants happy and healthy. Aqua One Glass Heaters make it easy to maintain the correct temperature, by providing accurate adjustable temperature and exceptional durability. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuality and economical heater completely submersible with double insulation\u003c\/li\u003e\n\u003cli\u003eHeater thermostat with easy to use temperature settings, temperature range from 20°C - 34°C\u003c\/li\u003e\n\u003cli\u003eAutomatic shut off and ‘on’ light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect the proper wattage heater for your reservoir, normally 1 watt will heat 1 litre of water. For example a 200W heater is required for a 180 to 200L reservoir.\u003c\/p\u003e\n\u003cp\u003ePosition the heater in the reservoir the best position is near a strong water flow. Use the suction caps provided to fasten the heater to the reservoir. Suction caps should be positioned on the top third of the heater not on the heating element. Do not plug the heater in unless submersed in water.\u003c\/p\u003e\n\u003cp\u003eAlways allow 10-15 minutes for the heater to acclimate to the reservoir temperature before plugging the unit in.\u003c\/p\u003e\n\u003cp\u003ePlug the power cord into the power socket and arrange a “drip loop” and turn on.\u003c\/p\u003e\n\u003cp\u003eTo set the heater, use the purple control knob at the top of the heater to adjust to the desired temperature. Continue turning the knob until the preferred temperature is displayed in the window on the front of the heater.\u003c\/p\u003e\n\u003cp\u003eA light will come on when the heater is working, It will switch off when it reaches the set temperature.\u003c\/p\u003e\n\u003cp\u003eYou can confirm your set temperature with an accurate thermometer. The thermometer should be placed at the opposite end of the reservoir to the heater. A small variation between the heater’s set temperature and the thermometers reading is normal.\u003c\/p\u003e\n\u003cp\u003eAlways disconnect the heaters power supply prior to working on the reservoir hardware\u003c\/p\u003e\n\u003cp\u003eIf removing the heater from the reservoir, turn it off at the power supply, wait 5-10 minutes to allow it to cool, and then remove it.\u003c\/p\u003e\n\u003cp\u003eIf the heater is cracked and\/or has moisture inside it, turn the power off at the main power supply, unplug the unit and remove it from the reservoir.\u003c\/p\u003e\n\u003cp\u003eDo not operate your Aqua One heater when it is not submerged in water. The water level must be maintained at the minimum water level line at all times.\u003c\/p\u003e\n\u003cp\u003eWhat temperature should my nutrient solution be?\u003c\/p\u003e\n\u003cp\u003eThe best temperature is between 18°C and 22°C. Any lower and growth will slow down and any higher and you will start to deprive the solution of oxygen. During summer, it is sometimes difficult to keep temperatures low enough. Generally, you will need to aerate the solution if the water temperature gets too high. The absolute maximum solution temperature is 32°C. Above this and the plant will begin to suffer. During winter, in most places, heating the solution is necessary\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43605920269,"sku":"9325136030051","price":37.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/200wWaterHeaterGlass275mmAquaone_2.png?v=1719953062"},{"product_id":"water-pump-4900-moray-4800-litres-per-hour-34m-mhh","title":"Water Pump 4900 Moray - 4800 Litres Per Hour - 3.4 metre max head height","description":"\u003cp\u003e\u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e Water pumps provide excellent water circulation and aeration in any Hydroponic system, Custom Irrigation systems, Aquaponics, Aquariums, Ponds, Fountains \u0026amp; Waterfalls. Energy efficient, quiet operation, reliable and versatile. Fully submersible oil free motor ensures no toxic chemicals are released into the reservoir. These multipurpose submersible pumps can also be used for running water anywhere it needs to be pumped. Easily taken apart for cleaning, ensuring hassle-free upkeep. \u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e pumps are available in a range of sizes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt with salt resistant materials - Can be \u003cspan\u003eused in fresh or salt water \u003c\/span\u003e\u003cspan\u003ecorrosive environments\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePump uses 100 watts of power\u003c\/li\u003e\n\u003cli\u003ePump maximum flow rate 4800 Litres Per Hour at pump outlet\u003c\/li\u003e\n\u003cli\u003ePump maximum head height 3.4 metres\u003c\/li\u003e\n\u003cli\u003e19mm Pump outlet hose connection \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the pumps are being used in salt water, they must be checked regularly for build-up of calcium and other deposits. To maximise the life of your pump, it is recommended to clean the pump casing and the impeller every 6 - 8 weeks or earlier if flow has decreased significantly. Prior to cleaning, disconnect the pump from the electrical power supply. The casing of the pump and the strainer can be cleaned with a firm brush\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43606008269,"sku":"9325136029314","price":239.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/WaterPump4900Moray-4800LitresPerHour3.4mMh_h.png?v=1715641614"},{"product_id":"water-pump-480-moray-720-litres-per-hour-96m-mhh","title":"Water Pump 480 Moray - 720 Litres Per Hour - .96 metre max head height","description":"\u003cp\u003e\u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e Water pumps provide excellent water circulation and aeration in any Hydroponic system, Custom Irrigation systems, Aquaponics, Aquariums, Ponds, Fountains \u0026amp; Waterfalls. Energy efficient, quiet operation, reliable and versatile. Fully submersible oil free motor ensures no toxic chemicals are released into the reservoir. These multipurpose submersible pumps can also be used for running water anywhere it needs to be pumped. Easily taken apart for cleaning, ensuring hassle-free upkeep. \u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e pumps are available in a range of sizes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt with salt resistant materials - Can be \u003cspan\u003eused in fresh or salt water \u003c\/span\u003e\u003cspan\u003ecorrosive environments\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePump uses 8.5 watts of power\u003c\/li\u003e\n\u003cli\u003ePump maximum flow rate 720 Litres Per Hour at pump outlet\u003c\/li\u003e\n\u003cli\u003ePump maximum head height 0.96 metres\u003c\/li\u003e\n\u003cli\u003e13mm Pump outlet hose connection \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the pumps are being used in salt water, they must be checked regularly for build-up of calcium and other deposits. To maximise the life of your pump, it is recommended to clean the pump casing and the impeller every 6 - 8 weeks or earlier if flow has decreased significantly. Prior to cleaning, disconnect the pump from the electrical power supply. The casing of the pump and the strainer can be cleaned with a firm brush\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43606027021,"sku":"9325136037913","price":39.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/WaterPump480Moray-720LitresPerHour.96mMh_h.png?v=1715715480"},{"product_id":"water-pump-3600-moray-3600-litres-per-hour-34m-mhh","title":"Water Pump 3600 Moray -3600 Litres Per Hour - 3.4 metre max head height","description":"\u003cp\u003e\u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e Water pumps provide excellent water circulation and aeration in any Hydroponic system, Custom Irrigation systems, Aquaponics, Aquariums, Ponds, Fountains \u0026amp; Waterfalls. Energy efficient, quiet operation, reliable and versatile. Fully submersible oil free motor ensures no toxic chemicals are released into the reservoir. These multipurpose submersible pumps can also be used for running water anywhere it needs to be pumped. Easily taken apart for cleaning, ensuring hassle-free upkeep. \u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e pumps are available in a range of sizes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt with salt resistant materials - Can be \u003cspan\u003eused in fresh or salt water \u003c\/span\u003e\u003cspan\u003ecorrosive environments\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePump uses 79 watts of power\u003c\/li\u003e\n\u003cli\u003ePump maximum flow rate 3600 Litres Per Hour at pump outlet\u003c\/li\u003e\n\u003cli\u003ePump maximum head height 3.4 metres\u003c\/li\u003e\n\u003cli\u003e19mm Pump outlet hose connection \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the pumps are being used in salt water, they must be checked regularly for build-up of calcium and other deposits. To maximise the life of your pump, it is recommended to clean the pump casing and the impeller every 6 - 8 weeks or earlier if flow has decreased significantly. Prior to cleaning, disconnect the pump from the electrical power supply. The casing of the pump and the strainer can be cleaned with a firm brush\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43606096333,"sku":"9325136029307","price":139.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/WaterPump3600Moray-3600LitresPerHour3.4mMh_h.png?v=1715641832"},{"product_id":"water-pump-360-moray-600-litres-per-hour-86m-mhh","title":"Water Pump 360 Moray - 600 Litres Per Hour - .86 metre max head height","description":"\u003cp\u003e\u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e Water pumps provide excellent water circulation and aeration in any Hydroponic system, Custom Irrigation systems, Aquaponics, Aquariums, Ponds, Fountains \u0026amp; Waterfalls. Energy efficient, quiet operation, reliable and versatile. Fully submersible oil free motor ensures no toxic chemicals are released into the reservoir. These multipurpose submersible pumps can also be used for running water anywhere it needs to be pumped. Easily taken apart for cleaning, ensuring hassle-free upkeep. \u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e pumps are available in a range of sizes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt with salt resistant materials - Can be \u003cspan\u003eused in fresh or salt water \u003c\/span\u003e\u003cspan\u003ecorrosive environments\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePump uses 6.5 watts of power\u003c\/li\u003e\n\u003cli\u003ePump maximum flow rate 600 Litres Per Hour at pump outlet\u003c\/li\u003e\n\u003cli\u003ePump maximum head height 0.86 metres\u003c\/li\u003e\n\u003cli\u003e13mm Pump outlet hose connection \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the pumps are being used in salt water, they must be checked regularly for build-up of calcium and other deposits. To maximise the life of your pump, it is recommended to clean the pump casing and the impeller every 6 - 8 weeks or earlier if flow has decreased significantly. Prior to cleaning, disconnect the pump from the electrical power supply. The casing of the pump and the strainer can be cleaned with a firm brush\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43606101325,"sku":"9325136037906","price":33.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/WaterPump360Moray-600LitresPerHour.86mMh_h.png?v=1715644137"},{"product_id":"water-heater-300w-thermosafe-aquaone","title":"Water Heater 300w Thermosafe - Aquaone","description":"\u003cp\u003eMaintaining water temperature is an essential requirement for keeping hydroponic plants happy and healthy. Aqua One ThermoSafe heaters are made from high quality quartz which makes them durable and shatter resistant. The thermal cut out protection safeguards the heater from damage if accidentally exposed to water shortage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple to use, with an easy to read temperature guide, Aqua One ThermoSafe heaters are the optimum choice for your reservoir\u003c\/li\u003e\n\u003cli\u003eHigh quality heater with shatter resistant Quartz glass and Microchip controlled thermal cut-off\u003c\/li\u003e\n\u003cli\u003eFully submersible with simple installation with suction cups provided and Easy to read temperature guide Indicator light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect the proper wattage heater for your reservoir, normally 1 watt will heat 1 litre of water. For example a 200W heater is required for a 180 to 200L reservoir.\u003c\/p\u003e\n\u003cp\u003ePosition the heater in the reservoir the best position is near a strong water flow. Use the suction caps provided to fasten the heater to the reservoir. Suction caps should be positioned on the top third of the heater not on the heating element. Do not plug the heater in unless submersed in water.\u003c\/p\u003e\n\u003cp\u003eAlways allow 10-15 minutes for the heater to acclimate to the reservoir temperature before plugging the unit in.\u003c\/p\u003e\n\u003cp\u003ePlug the power cord into the power socket and arrange a “drip loop” and turn on.\u003c\/p\u003e\n\u003cp\u003eTo set the heater, use the control knob at the top of the heater to adjust to the desired temperature. Continue turning the knob until the preferred temperature is displayed in the window on the front of the heater.\u003c\/p\u003e\n\u003cp\u003eA light will come on when the heater is working, It will switch off when it reaches the set temperature.\u003c\/p\u003e\n\u003cp\u003eYou can confirm your set temperature with an accurate thermometer. The thermometer should be placed at the opposite end of the reservoir to the heater. A small variation between the heater’s set temperature and the thermometers reading is normal.\u003c\/p\u003e\n\u003cp\u003eAlways disconnect the heaters power supply prior to working on the reservoir hardware\u003c\/p\u003e\n\u003cp\u003eIf removing the heater from the reservoir, turn it off at the power supply, wait 5-10 minutes to allow it to cool, and then remove it.\u003c\/p\u003e\n\u003cp\u003eIf the heater is cracked and\/or has moisture inside it, turn the power off at the main power supply, unplug the unit and remove it from the reservoir.\u003c\/p\u003e\n\u003cp\u003eDo not operate your Aqua One heater when it is not submerged in water. The water level must be maintained at the minimum water level line at all times.\u003c\/p\u003e\n\u003cp\u003eWhat temperature should my nutrient solution be?\u003c\/p\u003e\n\u003cp\u003eThe best temperature is between 18°C and 22°C. Any lower and growth will slow down and any higher and you will start to deprive the solution of oxygen. During summer, it is sometimes difficult to keep temperatures low enough. Generally, you will need to aerate the solution if the water temperature gets too high. The absolute maximum solution temperature is 32°C. Above this and the plant will begin to suffer. During winter, in most places, heating the solution is necessary\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43606159309,"sku":"9325136043976","price":49.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/300wWaterHeaterThermosafeAquaone_2.png?v=1719953209"},{"product_id":"water-heater-glass-300w-330mm-long-aquaone","title":"Water Heater Glass 300w - 330mm Long - Aquaone","description":"\u003cp\u003eMaintaining correct water temperature is an essential requirement for keeping hydroponic plants happy and healthy. Aqua One Glass Heaters make it easy to maintain the correct temperature, by providing accurate adjustable temperature and exceptional durability. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuality and economical heater completely submersible with double insulation\u003c\/li\u003e\n\u003cli\u003eHeater thermostat with easy to use temperature settings, temperature range from 20°C - 34°C\u003c\/li\u003e\n\u003cli\u003eAutomatic shut off and ‘on’ light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect the proper wattage heater for your reservoir, normally 1 watt will heat 1 litre of water. For example a 200W heater is required for a 180 to 200L reservoir.\u003c\/p\u003e\n\u003cp\u003ePosition the heater in the reservoir the best position is near a strong water flow. Use the suction caps provided to fasten the heater to the reservoir. Suction caps should be positioned on the top third of the heater not on the heating element. Do not plug the heater in unless submersed in water.\u003c\/p\u003e\n\u003cp\u003eAlways allow 10-15 minutes for the heater to acclimate to the reservoir temperature before plugging the unit in.\u003c\/p\u003e\n\u003cp\u003ePlug the power cord into the power socket and arrange a “drip loop” and turn on.\u003c\/p\u003e\n\u003cp\u003eTo set the heater, use the purple control knob at the top of the heater to adjust to the desired temperature. Continue turning the knob until the preferred temperature is displayed in the window on the front of the heater.\u003c\/p\u003e\n\u003cp\u003eA light will come on when the heater is working, It will switch off when it reaches the set temperature.\u003c\/p\u003e\n\u003cp\u003eYou can confirm your set temperature with an accurate thermometer. The thermometer should be placed at the opposite end of the reservoir to the heater. A small variation between the heater’s set temperature and the thermometers reading is normal.\u003c\/p\u003e\n\u003cp\u003eAlways disconnect the heaters power supply prior to working on the reservoir hardware\u003c\/p\u003e\n\u003cp\u003eIf removing the heater from the reservoir, turn it off at the power supply, wait 5-10 minutes to allow it to cool, and then remove it.\u003c\/p\u003e\n\u003cp\u003eIf the heater is cracked and\/or has moisture inside it, turn the power off at the main power supply, unplug the unit and remove it from the reservoir.\u003c\/p\u003e\n\u003cp\u003eDo not operate your Aqua One heater when it is not submerged in water. The water level must be maintained at the minimum water level line at all times.\u003c\/p\u003e\n\u003cp\u003eWhat temperature should my nutrient solution be?\u003c\/p\u003e\n\u003cp\u003eThe best temperature is between 18°C and 22°C. Any lower and growth will slow down and any higher and you will start to deprive the solution of oxygen. During summer, it is sometimes difficult to keep temperatures low enough. Generally, you will need to aerate the solution if the water temperature gets too high. The absolute maximum solution temperature is 32°C. Above this and the plant will begin to suffer. During winter, in most places, heating the solution is necessary\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43606167245,"sku":"9325136030075","price":39.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/300wWaterHeaterGlass330mmAquaone_2.png?v=1719953136"},{"product_id":"air-pump-360-litres-per-hour-2-outlet-aquaone-precision-7500","title":"Air Pump 360 Litres Per Hour 2 Outlet - Aquaone Precision 7500","description":"\u003cp\u003eAir pumps improve hydroponic system aeration performance and overall water quality by increasing water flow which helps to eliminate localised build-up of nutrients and additives. This makes for happy and healthy plants.\u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp\u003eHigh quality robust units that have been built to last with near silent operation. Simple diaphragm replacement can be achieved if required\u003c\/p\u003e\n\u003cp\u003eOutlets suit standard 4mm airline tubing\u003c\/p\u003e\n\u003cp\u003eDecide where you are going to position the air pump. Remember the pump must remain accessible for maintenance and avoid placing the pump on a carpeted surface. Where possible place the pump above the reservoir, If this is not possible then ensure that a check valve (sold separately) is fitted to the airline, failure to do so may damage your air pump \u0026amp; void your Guarantee. Ensure the check valve is inserted correctly, they only flow one way. Attach one end of the air line into your air stone and the other into the outlet of your pump.\u003c\/p\u003e\n\u003cp\u003eEnsure the pump is not going to vibrate off what ever surface you place it on.\u003c\/p\u003e\n\u003cp\u003eRemember to arrange a drip loop.\u003c\/p\u003e\n\u003cp\u003eIt is essential to replace the air stone regulary every 6 months or when it shows signs of deterioration. If being used in salt water a ceramic air stone is recommended.\u003c\/p\u003e\n\u003cp\u003eProblem solving if the Pump does not work:\u003c\/p\u003e\n\u003cp\u003eEnsure the plug is inserted correctly and the switch is in the on position and also your power outlet does have power and a circuit breaker hasn't been triggered.\u003c\/p\u003e\n\u003cp\u003eIf the pump motor is working but there is no air coming out of the pump or the pump is very noisy. Check that the air line is not kinked, Check the air stone and replace if needed. There is a rubber diaphragm inside the pump which may have warn out and may require replacing. \u003c\/p\u003e\n\u003cp\u003eThis unit uses 3.5 watts of power\u003c\/p\u003e\n\u003cp\u003eIs it a good idea to aerate the nutrient solution?\u003c\/p\u003e\n\u003cp\u003eYes, especially when solution temperatures start to rise during the warmer months as warm water can’t retain as much dissolved oxygen as cool water. \u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43606684301,"sku":"9325136000016","price":25.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirPump360Litre-Hour2Outlet-AquaonePrecision7500.png?v=1731725193"},{"product_id":"water-heater-glass-55w-185mm-long-aquaone","title":"Water Heater Glass 55w - 185mm Long - Aquaone","description":"\u003cp\u003eMaintaining correct water temperature is an essential requirement for keeping hydroponic plants happy and healthy. Aqua One Glass Heaters make it easy to maintain the correct temperature, by providing accurate adjustable temperature and exceptional durability. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuality and economical heater completely submersible with double insulation\u003c\/li\u003e\n\u003cli\u003eHeater thermostat with easy to use temperature settings, temperature range from 20°C - 34°C\u003c\/li\u003e\n\u003cli\u003eAutomatic shut off and ‘on’ light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect the proper wattage heater for your reservoir, normally 1 watt will heat 1 litre of water. For example a 200W heater is required for a 180 to 200L reservoir.\u003c\/p\u003e\n\u003cp\u003ePosition the heater in the reservoir the best position is near a strong water flow. Use the suction caps provided to fasten the heater to the reservoir. Suction caps should be positioned on the top third of the heater not on the heating element. Do not plug the heater in unless submersed in water.\u003c\/p\u003e\n\u003cp\u003eAlways allow 10-15 minutes for the heater to acclimate to the reservoir temperature before plugging the unit in.\u003c\/p\u003e\n\u003cp\u003ePlug the power cord into the power socket and arrange a “drip loop” and turn on.\u003c\/p\u003e\n\u003cp\u003eTo set the heater, use the purple control knob at the top of the heater to adjust to the desired temperature. Continue turning the knob until the preferred temperature is displayed in the window on the front of the heater.\u003c\/p\u003e\n\u003cp\u003eA light will come on when the heater is working, It will switch off when it reaches the set temperature.\u003c\/p\u003e\n\u003cp\u003eYou can confirm your set temperature with an accurate thermometer. The thermometer should be placed at the opposite end of the reservoir to the heater. A small variation between the heater’s set temperature and the thermometers reading is normal.\u003c\/p\u003e\n\u003cp\u003eAlways disconnect the heaters power supply prior to working on the reservoir hardware\u003c\/p\u003e\n\u003cp\u003eIf removing the heater from the reservoir, turn it off at the power supply, wait 5-10 minutes to allow it to cool, and then remove it.\u003c\/p\u003e\n\u003cp\u003eIf the heater is cracked and\/or has moisture inside it, turn the power off at the main power supply, unplug the unit and remove it from the reservoir.\u003c\/p\u003e\n\u003cp\u003eDo not operate your Aqua One heater when it is not submerged in water. The water level must be maintained at the minimum water level line at all times.\u003c\/p\u003e\n\u003cp\u003eWhat temperature should my nutrient solution be?\u003c\/p\u003e\n\u003cp\u003eThe best temperature is between 18°C and 22°C. Any lower and growth will slow down and any higher and you will start to deprive the solution of oxygen. During summer, it is sometimes difficult to keep temperatures low enough. Generally, you will need to aerate the solution if the water temperature gets too high. The absolute maximum solution temperature is 32°C. Above this and the plant will begin to suffer. During winter, in most places, heating the solution is necessary\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43611186125,"sku":"9325136030013","price":35.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/55wWaterHeaterGlass185mmAquaone_2.png?v=1719952800"},{"product_id":"water-heater-50w-thermosafe-aquaone","title":"Water Heater 50w Thermosafe - Aquaone","description":"\u003cp\u003eMaintaining water temperature is an essential requirement for keeping hydroponic plants happy and healthy. Aqua One ThermoSafe heaters are made from high quality quartz which makes them durable and shatter resistant. The thermal cut out protection safeguards the heater from damage if accidentally exposed to water shortage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple to use, with an easy to read temperature guide, Aqua One ThermoSafe heaters are the optimum choice for your reservoir\u003c\/li\u003e\n\u003cli\u003eHigh quality heater with shatter resistant Quartz glass and Microchip controlled thermal cut-off\u003c\/li\u003e\n\u003cli\u003eFully submersible with simple installation with suction cups provided and Easy to read temperature guide Indicator light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect the proper wattage heater for your reservoir, normally 1 watt will heat 1 litre of water. For example a 200W heater is required for a 180 to 200L reservoir.\u003c\/p\u003e\n\u003cp\u003ePosition the heater in the reservoir the best position is near a strong water flow. Use the suction caps provided to fasten the heater to the reservoir. Suction caps should be positioned on the top third of the heater not on the heating element. Do not plug the heater in unless submersed in water.\u003c\/p\u003e\n\u003cp\u003eAlways allow 10-15 minutes for the heater to acclimate to the reservoir temperature before plugging the unit in.\u003c\/p\u003e\n\u003cp\u003ePlug the power cord into the power socket and arrange a “drip loop” and turn on.\u003c\/p\u003e\n\u003cp\u003eTo set the heater, use the control knob at the top of the heater to adjust to the desired temperature. Continue turning the knob until the preferred temperature is displayed in the window on the front of the heater.\u003c\/p\u003e\n\u003cp\u003eA light will come on when the heater is working, It will switch off when it reaches the set temperature.\u003c\/p\u003e\n\u003cp\u003eYou can confirm your set temperature with an accurate thermometer. The thermometer should be placed at the opposite end of the reservoir to the heater. A small variation between the heater’s set temperature and the thermometers reading is normal.\u003c\/p\u003e\n\u003cp\u003eAlways disconnect the heaters power supply prior to working on the reservoir hardware\u003c\/p\u003e\n\u003cp\u003eIf removing the heater from the reservoir, turn it off at the power supply, wait 5-10 minutes to allow it to cool, and then remove it.\u003c\/p\u003e\n\u003cp\u003eIf the heater is cracked and\/or has moisture inside it, turn the power off at the main power supply, unplug the unit and remove it from the reservoir.\u003c\/p\u003e\n\u003cp\u003eDo not operate your Aqua One heater when it is not submerged in water. The water level must be maintained at the minimum water level line at all times.\u003c\/p\u003e\n\u003cp\u003eWhat temperature should my nutrient solution be?\u003c\/p\u003e\n\u003cp\u003eThe best temperature is between 18°C and 22°C. Any lower and growth will slow down and any higher and you will start to deprive the solution of oxygen. During summer, it is sometimes difficult to keep temperatures low enough. Generally, you will need to aerate the solution if the water temperature gets too high. The absolute maximum solution temperature is 32°C. Above this and the plant will begin to suffer. During winter, in most places, heating the solution is necessary\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43611198797,"sku":"9325136043914","price":45.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/50wWaterHeaterThermosafeAquaone_2.png?v=1719952758"},{"product_id":"air-pump-800-litres-per-hour-4-outlet-adjustable-aquaone-precision-12000","title":"Air Pump 800 Litres Per Hour 4 Outlet Adjustable - Aquaone Precision 12000","description":"\u003cp\u003eAir pumps improve hydroponic system aeration performance and overall water quality by increasing water flow which helps to eliminate localised build-up of nutrients and additives. This makes for happy and healthy plants.\u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp\u003eHigh quality robust units that have been built to last with near silent operation. Simple diaphragm replacement can be achieved if required\u003c\/p\u003e\n\u003cp\u003eOutlets suit standard 4mm airline tubing\u003c\/p\u003e\n\u003cp\u003eDecide where you are going to position the air pump. Remember the pump must remain accessible for maintenance and avoid placing the pump on a carpeted surface. Where possible place the pump above the reservoir, If this is not possible then ensure that a check valve (sold separately) is fitted to the airline, failure to do so may damage your air pump \u0026amp; void your Guarantee. Ensure the check valve is inserted correctly, they only flow one way. Attach one end of the air line into your air stone and the other into the outlet of your pump.\u003c\/p\u003e\n\u003cp\u003eEnsure the pump is not going to vibrate off what ever surface you place it on.\u003c\/p\u003e\n\u003cp\u003eRemember to arrange a drip loop.\u003c\/p\u003e\n\u003cp\u003eIt is essential to replace the air stone regulary every 6 months or when it shows signs of deterioration. If being used in salt water a ceramic air stone is recommended.\u003c\/p\u003e\n\u003cp\u003eProblem solving if the Pump does not work:\u003c\/p\u003e\n\u003cp\u003eEnsure the plug is inserted correctly and the switch is in the on position and also your power outlet does have power and a circuit breaker hasn't been triggered.\u003c\/p\u003e\n\u003cp\u003eIf the pump motor is working but there is no air coming out of the pump or the pump is very noisy. Check that the air line is not kinked, Check the air stone and replace if needed. There is a rubber diaphragm inside the pump which may have warn out and may require replacing. \u003c\/p\u003e\n\u003cp\u003eThis unit uses 9.4 watts of power\u003c\/p\u003e\n\u003cp\u003eIs it a good idea to aerate the nutrient solution?\u003c\/p\u003e\n\u003cp\u003eYes, especially when solution temperatures start to rise during the warmer months as warm water can’t retain as much dissolved oxygen as cool water. \u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43611854861,"sku":"9325136000047","price":59.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirPump800Litre-Hour4OutletAdjustable-AquaonePrecision12000.png?v=1731725220"},{"product_id":"care-kit-ec-conductivity-probe-bluelab","title":"Care Kit EC - Conductivity Probe - bluelab ®","description":"\u003cp\u003eThe EC - CF meter is only as accurate as the probe is clean. Accurate readings simplify crop management and provide improved growth. Proper ppm\/EC probe maintenance also ensures you maximise the life of the probe and instrument.\u003cbr\u003e \u003cbr\u003eThe probe surface is where the instrument takes the reading of the solution. If the probe face is dirty or contaminated, the readings may be inaccurate. Much like the windshield of a car, if it’s dirty you can’t see out! If the probe face is dirty, it cannot read the solution.\u003cbr\u003e \u003cbr\u003eA tip… if the conductivity reads low, the probe needs cleaning.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProbe care instructions\u003c\/li\u003e\n\u003cli\u003e2x 20ml single-use Bluelab 2.77 EC Conductivity Standard Solution\u003c\/li\u003e\n\u003cli\u003ePlastic cup\u003c\/li\u003e\n\u003cli\u003eBluelab Conductivity Probe Cleaner\u003c\/li\u003e\n\u003cli\u003eBluelab Chamois (conductivity probe cleaning instrument)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"bluelab","offers":[{"title":"Default Title","offer_id":43612009869,"sku":"9421024920579","price":28.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/BL_Image-Packaging_CAREKITCON-Contents.png?v=1729642233"},{"product_id":"impeller-water-pump-replacement-for-3600-moray","title":"Impeller Water Pump Replacement for 3600 Moray","description":"\u003cp\u003e\u003cspan\u003eKeep your Aqua One Moray 3600 Water Pump running smoothly with our high-quality impeller replacement. Designed to fit perfectly, this replacement impeller ensures optimal performance and longevity for your pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically designed for the Aqua One Moray 3600 Water Pump\u003c\/li\u003e\n\u003cli\u003eMade from High quality - durable materials to withstand continuous use\u003c\/li\u003e\n\u003cli\u003eSimple to install, allowing you to replace the impeller without hassle\u003c\/li\u003e\n\u003cli\u003eRestores the pump's efficiency, ensuring consistent water circulation and aeration\u003c\/li\u003e\n\u003cli\u003eA great alternative to replacing the entire pump, saving you money\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43614123597,"sku":"9325136048803","price":60.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/IMPELLERWATERPUMPREPLACEMENTFOR3600MORAY_2.png?v=1730500990"},{"product_id":"impeller-water-pump-replacement-for-360-480-moray","title":"Impeller Water Pump Replacement for 360 \u0026 480 Moray","description":"\u003cp\u003e\u003cspan\u003eKeep your Aqua One Moray 360 \u0026amp; 480 Water Pump running smoothly with our high-quality impeller replacement. Designed to fit perfectly, this replacement impeller ensures optimal performance and longevity for your pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically designed for the Aqua One Moray 360 \u0026amp; 480 Water Pump\u003c\/li\u003e\n\u003cli\u003eMade from High quality - durable materials to withstand continuous use\u003c\/li\u003e\n\u003cli\u003eSimple to install, allowing you to replace the impeller without hassle\u003c\/li\u003e\n\u003cli\u003eRestores the pump's efficiency, ensuring consistent water circulation and aeration\u003c\/li\u003e\n\u003cli\u003eA great alternative to replacing the entire pump, saving you money\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43614142797,"sku":"9325136022018","price":15.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/ImpellerReplacementfor360_480MorayWaterPump_2.png?v=1730500943"},{"product_id":"impeller-water-pump-replacement-for-2300-moray","title":"Impeller Water Pump Replacement for 2300 Moray","description":"\u003cp\u003e\u003cspan\u003eKeep your Aqua One Moray 2300 Water Pump running smoothly with our high-quality impeller replacement. Designed to fit perfectly, this replacement impeller ensures optimal performance and longevity for your pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically designed for the Aqua One Moray 2300 Water Pump\u003c\/li\u003e\n\u003cli\u003eMade from High quality - durable materials to withstand continuous use\u003c\/li\u003e\n\u003cli\u003eSimple to install, allowing you to replace the impeller without hassle\u003c\/li\u003e\n\u003cli\u003eRestores the pump's efficiency, ensuring consistent water circulation and aeration\u003c\/li\u003e\n\u003cli\u003eA great alternative to replacing the entire pump, saving you money\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43614162445,"sku":"9325136030839","price":40.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/ImpellerReplacementfor2300MorayWaterPump_2.png?v=1730500968"},{"product_id":"impeller-water-pump-replacement-for-1300-moray","title":"Impeller Water Pump Replacement for 1300 Moray","description":"\u003cp\u003e\u003cspan\u003eKeep your Aqua One Moray 1300 Water Pump running smoothly with our high-quality impeller replacement. Designed to fit perfectly, this replacement impeller ensures optimal performance and longevity for your pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically designed for the Aqua One Moray 1300 Water Pump\u003c\/li\u003e\n\u003cli\u003eMade from High quality - durable materials to withstand continuous use\u003c\/li\u003e\n\u003cli\u003eSimple to install, allowing you to replace the impeller without hassle\u003c\/li\u003e\n\u003cli\u003eRestores the pump's efficiency, ensuring consistent water circulation and aeration\u003c\/li\u003e\n\u003cli\u003eA great alternative to replacing the entire pump, saving you money\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43614187085,"sku":"9325136022025","price":25.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/mpellerReplacementfor1300MorayWaterPump_2.png?v=1730501034"},{"product_id":"ph-controller-automatic-dosing-bluelab","title":"pH Controller Automatic Dosing - bluelab ®","description":"\u003cp\u003eBluelab pH Controller for automatic dosing of pH levels in nutrient solutions, creating stable environments for plants to thrive. Fine-tunes the reservoir pH levels for you. Confidence - your pH is taken care of. Automatic measuring and adjusting to pre-set pH levels with optional alarms. Provides consistent control of pH in growing systems. Intuitive “on time” and “off time” allows the solution to dose and mix before the controller measures and doses again. Reassurance with safety lockouts to prevent over delivery of pH. Probe cable length: 2 meters \/ 6.5 feet\u003c\/p\u003e\n\u003cp\u003e• Automatic control of pH level in systems with reservoirs up to 760 litres\u003c\/p\u003e\n\u003cp\u003e• Dose either pH up or pH down adjusters\u003c\/p\u003e\n\u003cp\u003e• Replaceable double junction pH probe \u0026amp; peristaltic pump\u003c\/p\u003e\n\u003cp\u003e• Plant-safe green backlit LCD with adjustable brightness\u003c\/p\u003e\n\u003cp\u003e• Large, easy to read display\u003c\/p\u003e\n\u003cp\u003e• Easy to navigate menu to adjust settings\u003c\/p\u003e\n\u003cp\u003e• Simple push button pH calibration with on screen instructions\u003c\/p\u003e\n\u003cp\u003e• Flashing high and low alarms with control lockouts\u003c\/p\u003e\n\u003cp\u003e• Water resistant, wall mount design\u003c\/p\u003e\n\u003cp\u003e• Separate Bluelab® Temperature Probe (for pH ATC)\u003c\/p\u003e\n\u003cp\u003ePackaged Weight: 1.00 kg\u003c\/p\u003e\n\u003cp\u003ePackaged Length: 207 mm \u003c\/p\u003e\n\u003cp\u003ePackaged Width: 107 mm\u003c\/p\u003e\n\u003cp\u003ePackaged Height: 196 mm \u003c\/p\u003e","brand":"bluelab","offers":[{"title":"Default Title","offer_id":43614964301,"sku":"9421024920678","price":799.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/PHCONTROLLERAUTOMATICDOSING.png?v=1775013220"},{"product_id":"ph-test-kit-super-concentrated-up-to-800-tests-flairform","title":"pH Test Kit - Super concentrated up to 800 tests - Flairform","description":"\u003cp\u003epH Test Kit Flairform a simple drop pH tester, simple to use and a must for Hydroponic gardeners. Get up to 800 accurate tests with this super concentrated kit.\u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003eSuper concentrated - ONE to two drops per test - approximately 800 tests.\u003co:p\u003e\u003c\/o:p\u003epH range 4.5 to 9.0\u003co:p\u003e\u003c\/o:p\u003e\n\u003c\/li\u003e\n\u003cli\u003eProduces fast pH readings\u003co:p\u003e\u003c\/o:p\u003e\n\u003c\/li\u003e\n\u003cli\u003eWaterproof colour chart on side of bottle\u003co:p\u003e\u003c\/o:p\u003e\n\u003c\/li\u003e\n\u003cli\u003ePerfect back-up for die-hard pH meter users\u003co:p\u003e\u003c\/o:p\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupplied with sturdy test tube\u003co:p\u003e\u003c\/o:p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat should the pH of nutrient solution be?\u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp\u003eIdeally, the pH should be maintained at 6.0 as at this point, a drift of half a pH point down to 5.5 or up to 6.5 is entirely acceptable. It will fluctuate, so maintaining the pH between 5.5 and 6.5 is fine. A short time a bit outside of this range should not cause any real problems but try to keep it within the recommended levels as much as possible. When the pH is outside the recommended range the plant will not be able to take up certain vital nutrients and therefore the growth will slow and in severe cases the plant will starve. \u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp\u003eWhy does the pH of my nutrient solution go UP?\u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp\u003eAssuming your system is set up correctly, this is normal and desirable in the vegetative period. It means that the plants are growing strongly, as they should be. If it occurs later than about four weeks into the bloom period it may mean that nitrogen levels are too high. Another cause of dramatic fluctuation of the pH is the reservoir being too small to cope with normal pH fluctuation. \u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp\u003eWhy does the pH of my nutrient solution go DOWN?\u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp\u003eAssuming your system is set up correctly, this will often occur in the bloom phase as the plants take up nutrients in different ratios. Normally, the pH drop is not as large as the pH rise in the growth phase. If it does drop significantly it could be root diseases attacking your plants or an undersized reservoir.  Always check your roots for disease \u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"mso-margin-top-alt: auto; mso-margin-bottom-alt: auto; line-height: normal;\"\u003eHow accurate is Flairform’s pH Test Kit?\u003cbr\u003eWhen using a pH Test Kit you will get accurate results every time. Even if electronic pH meters are properly maintained, they are still susceptible to error because lower quality electrodes respond to foreign 'species' (e.g. sodium). For this reason, if using an electronic pH meter, many growers will choose to occasionally cross check their readings with a Flairform pH Test Kit\u003c\/p\u003e","brand":"Flairform","offers":[{"title":"Default Title","offer_id":43617167117,"sku":"9337839000606","price":17.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/pHTestKit-Superconcentratedupto800tests-Flairform.png?v=1715628461"},{"product_id":"kci-storage-solution-for-ph-probe-120ml-bluelab","title":"KCI Storage Solution for pH Probe 120ml - bluelab ®","description":"\u003cp\u003eKCI solution to store and hydrate your bluelab pH probes. It is extremely important to care for and store pH probes correctly. pH probes are sensitive glass instruments which age through normal use. The life and performance of pH probes is reduced heavily when they are stored dry. KCl storage solution is made specifically for use with pH test equipment. It is designed to increase response time and maximize the life of bluelab pH pens and pH probes. It will also work with any other brand of pH test equipment requiring hydration and storage. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ebluelab solutions are manufactured to very high standards and National Institute of Standards and Technology (NIST) certified this traceable standard ensures your equipment lasts longer and maintains accuracy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse the KCl solution to hydrate and store the pH pen\/probe in after use\u003c\/li\u003e\n\u003cli\u003eAlways keep your pH probe hydrated - \u003cstrong\u003eIf it dries, it dies! \u003c\/strong\u003eCheck your probe even if not in use at least monthly and hydrate as required\u003c\/li\u003e\n\u003cli\u003eAlways follow the manufacturer’s instructions for use and care of your pH equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIdeal for use with the following Bluelab products or any other brand that requires hydration and storage:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ebluelab pH Pen\u003c\/li\u003e\n\u003cli\u003ebluelab Soil pH Pen\u003c\/li\u003e\n\u003cli\u003ebluelab pH Probes\u003c\/li\u003e\n\u003cli\u003ebluelab Soil pH Probes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"bluelab","offers":[{"title":"Default Title","offer_id":43617259981,"sku":"9421024921415","price":24.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/pHProbeKCIStorageSolution120mlbluelab_3171094e-5290-47d9-bc97-cd897394bca7.png?v=1722990493"},{"product_id":"care-kit-ph-probe-bluelab","title":"Care Kit pH probe - bluelab ®","description":"\u003cp\u003epH meters are only as accurate as the probe is clean. Accurate readings simplify crop management and provide improved growth. Probe cleaning and correctly storing pH probes ensures you get the most accurate readings possible and will maximise the life of the pH probe.\u003cbr\u003e \u003cbr\u003eThe probe surface is where the instrument takes the reading of the solution or soil\/media. If the probe face is dirty or contaminated, the readings may be inaccurate. Much like the windshield of a car, if it’s dirty you can’t see out! If the probe face is dirty, it cannot read the solution or soil accurately.\u003cbr\u003e \u003cbr\u003epH probes specifically, should be kept wet at all times for optimal performance and life.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProbe care instructions\u003c\/li\u003e\n\u003cli\u003e20ml single-use Bluelab Solution Sachets, 2 each of: pH 7.0 \u0026amp; pH 4.0, KCl\u003c\/li\u003e\n\u003cli\u003e3x plastic cups\u003c\/li\u003e\n\u003cli\u003eBluelab pH Probe Cleaner\u003c\/li\u003e\n\u003cli\u003eBluelab Toothbrush (pH probe cleaning instrument)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"bluelab","offers":[{"title":"Default Title","offer_id":43617289869,"sku":"9421024920623","price":28.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/phprobecarekit.png?v=1757379566"},{"product_id":"phlower5litre","title":"pH Lower 5 Litre","description":"\u003cp\u003epH Lower also called pH Down\u003c\/p\u003e\n\u003cp\u003eIdeally your hydroponic nutrient solution pH should be maintained at 6.0 at this point, a drift of half a pH point down to 5.5 or up to 6.5 is entirely acceptable. Generally pH levels will fluctuate, so maintaining the pH between 5.5 and 6.5 is fine. A short time outside of this range should not cause any real problems, always try to keep your pH within recommended levels as much as possible. When the pH is outside the recommended range the plant will not be able to take up certain vital nutrients and therefore the growth will slow and in severe cases the plant will starve. Note some types of plants require different pH levels to absorb the nutrients they require so a little bit of homework on your plants requirements maybe necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the pH of my nutrient solution go UP?\u003c\/strong\u003e \u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp\u003eAssuming your system is set up correctly, this is normal and desirable in the vegetative period. It means that the plants are growing strongly, as they should be. If it occurs later than about four weeks into the bloom period it may mean that nitrogen levels are too high. Another cause of dramatic fluctuation of the pH is the reservoir being too small to cope with normal pH fluctuation. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the pH of my nutrient solution go DOWN?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAssuming your system is set up correctly, this will often occur in the bloom phase as the plants take up nutrients in different ratios. Normally, the pH drop is not as large as the pH rise in the growth phase. If it does drop significantly it could be root diseases attacking your plants or an undersized reservoir.  Always check your roots for disease \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a pH meter and do I need one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pH meter is a small electronic device that is used to accurately measure the pH of a solution. It works by a glass probe detecting the tiny voltage produced when the hydrogen ion in solution makes contact with the glass probe. The more hydrogen in solution the more acidic the solution is. The meter will give a reading of a whole number followed by one or more decimals, 0.0-6.9 is acidic, 7.0 is neutral and 7.1 -14.0 is alkaline. It is very important to maintain the correct pH levels. Colour metric pH measuring kits are also available but are not as accurate. As all meters are inclined to drift, they become inaccurate over time, they need to be calibrated regularly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections for standard use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShake Bottle well before use\u003c\/li\u003e\n\u003cli\u003eAdd 10mls to 1 Litre of water and mix well\u003c\/li\u003e\n\u003cli\u003eSlowly add this diluted solution to your reservoir allowing for proper mixing in your reservoir tank\u003c\/li\u003e\n\u003cli\u003eTest frequently until your desired pH is reached\u003c\/li\u003e\n\u003cli\u003eRepeat the above steps if required to reach your target pH range\u003c\/li\u003e\n\u003cli\u003eLarger reservoirs will require larger amounts to lower the pH levels so please take your reservoir volume into account when mixing a stock lowering solution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSafety tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eUse protective gloves and eye protection as this product can cause burns\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAlways handle with care and keep out of the reach of children\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDo not swallow and avoid direct skin contact\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIf swallowed do not induce vomiting, drink a large volume of water and contact a medical professional ASAP\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIf skin contact occurs wash skin immediately with fresh water\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIf eye contact occurs hold eye open and flush with fresh water for 5-10 minutes then contact a medical professional ASAP\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eActive ingredients 380grams per Litre Nitric Acid \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUN2031 Classified 8 Corrosive Dangerous Good \u003c\/strong\u003e\u003c\/p\u003e","brand":"GHP","offers":[{"title":"Default Title","offer_id":4969806954532,"sku":"PH1520","price":119.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/products\/PHLowerFront5Lt.png?v=1715643360"},{"product_id":"phlower500ml","title":"pH Lower 500ml","description":"\u003cp\u003epH Lower also called pH Down\u003c\/p\u003e\n\u003cp\u003eIdeally your hydroponic nutrient solution pH should be maintained at 6.0 at this point, a drift of half a pH point down to 5.5 or up to 6.5 is entirely acceptable. Generally pH levels will fluctuate, so maintaining the pH between 5.5 and 6.5 is fine. A short time outside of this range should not cause any real problems, always try to keep your pH within recommended levels as much as possible. When the pH is outside the recommended range the plant will not be able to take up certain vital nutrients and therefore the growth will slow and in severe cases the plant will starve. Note some types of plants require different pH levels to absorb the nutrients they require so a little bit of homework on your plants requirements maybe necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the pH of my nutrient solution go UP?\u003c\/strong\u003e \u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp\u003eAssuming your system is set up correctly, this is normal and desirable in the vegetative period. It means that the plants are growing strongly, as they should be. If it occurs later than about four weeks into the bloom period it may mean that nitrogen levels are too high. Another cause of dramatic fluctuation of the pH is the reservoir being too small to cope with normal pH fluctuation. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the pH of my nutrient solution go DOWN?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAssuming your system is set up correctly, this will often occur in the bloom phase as the plants take up nutrients in different ratios. Normally, the pH drop is not as large as the pH rise in the growth phase. If it does drop significantly it could be root diseases attacking your plants or an undersized reservoir.  Always check your roots for disease \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a pH meter and do I need one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pH meter is a small electronic device that is used to accurately measure the pH of a solution. It works by a glass probe detecting the tiny voltage produced when the hydrogen ion in solution makes contact with the glass probe. The more hydrogen in solution the more acidic the solution is. The meter will give a reading of a whole number followed by one or more decimals, 0.0-6.9 is acidic, 7.0 is neutral and 7.1 -14.0 is alkaline. It is very important to maintain the correct pH levels. Colour metric pH measuring kits are also available but are not as accurate. As all meters are inclined to drift, they become inaccurate over time, they need to be calibrated regularly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections for standard use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShake Bottle well before use\u003c\/li\u003e\n\u003cli\u003eAdd 10mls to 1 Litre of water and mix well\u003c\/li\u003e\n\u003cli\u003eSlowly add this diluted solution to your reservoir allowing for proper mixing in your reservoir tank\u003c\/li\u003e\n\u003cli\u003eTest frequently until your desired pH is reached\u003c\/li\u003e\n\u003cli\u003eRepeat the above steps if required to reach your target pH range\u003c\/li\u003e\n\u003cli\u003eLarger reservoirs will require larger amounts to lower the pH levels so please take your reservoir volume into account when mixing a stock lowering solution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSafety tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eUse protective gloves and eye protection as this product can cause burns\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAlways handle with care and keep out of the reach of children\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDo not swallow and avoid direct skin contact\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIf swallowed do not induce vomiting, drink a large volume of water and contact a medical professional ASAP\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIf skin contact occurs wash skin immediately with fresh water\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIf eye contact occurs hold eye open and flush with fresh water for 5-10 minutes then contact a medical professional ASAP\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eActive ingredients 380grams per Litre Nitric Acid \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUN2031 Classified 8 Corrosive Dangerous Good \u003c\/strong\u003e\u003c\/p\u003e","brand":"GHP","offers":[{"title":"Default Title","offer_id":4969807183908,"sku":"PH1500","price":22.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/PHLower500mlfront.png?v=1729372656"},{"product_id":"phraise500ml","title":"pH Raise 500ml","description":"\u003cp\u003epH Raise also called pH Up\u003c\/p\u003e\n\u003cp\u003eIdeally your hydroponic nutrient solution pH should be maintained at 6.0 at this point, a drift of half a pH point down to 5.5 or up to 6.5 is entirely acceptable. Generally pH levels will fluctuate, so maintaining the pH between 5.5 and 6.5 is fine. A short time outside of this range should not cause any real problems, always try to keep your pH within recommended levels as much as possible. When the pH is outside the recommended range the plant will not be able to take up certain vital nutrients and therefore the growth will slow and in severe cases the plant will starve. Note some types of plants require different pH levels to absorb the nutrients they require so a little bit of homework on your plants requirements maybe necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the pH of my nutrient solution go UP?\u003c\/strong\u003e \u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp\u003eAssuming your system is set up correctly, this is normal and desirable in the vegetative period. It means that the plants are growing strongly, as they should be. If it occurs later than about four weeks into the bloom period it may mean that nitrogen levels are too high. Another cause of dramatic fluctuation of the pH is the reservoir being too small to cope with normal pH fluctuation. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the pH of my nutrient solution go DOWN?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAssuming your system is set up correctly, this will often occur in the bloom phase as the plants take up nutrients in different ratios. Normally, the pH drop is not as large as the pH rise in the growth phase. If it does drop significantly it could be root diseases attacking your plants or an undersized reservoir.  Always check your roots for disease \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a pH meter and do I need one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pH meter is a small electronic device that is used to accurately measure the pH of a solution. It works by a glass probe detecting the tiny voltage produced when the hydrogen ion in solution makes contact with the glass probe. The more hydrogen in solution the more acidic the solution is. The meter will give a reading of a whole number followed by one or more decimals, 0.0-6.9 is acidic, 7.0 is neutral and 7.1 -14.0 is alkaline. It is very important to maintain the correct pH levels. Colour metric pH measuring kits are also available but are not as accurate. As all meters are inclined to drift, they become inaccurate over time, they need to be calibrated regularly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections for standard use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShake Bottle well before use\u003c\/li\u003e\n\u003cli\u003eAdd 10mls to 1 Litre of water and mix well\u003c\/li\u003e\n\u003cli\u003eSlowly add this diluted solution to your reservoir allowing for proper mixing in your reservoir tank\u003c\/li\u003e\n\u003cli\u003eTest frequently until your desired pH is reached\u003c\/li\u003e\n\u003cli\u003eRepeat the above steps if required to reach your target pH range\u003c\/li\u003e\n\u003cli\u003eLarger reservoirs will require larger amounts to raise the pH levels so please take your reservoir volume into account when mixing a stock solution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSafety tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eUse protective gloves and eye protection as this product can cause burns\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAlways handle with care and keep out of the reach of children\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDo not swallow and avoid direct skin contact\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIf swallowed do not induce vomiting, drink a large volume of water and contact a medical professional ASAP\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIf skin contact occurs wash skin immediately with fresh water\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIf eye contact occurs hold eye open and flush with fresh water for 5-10 minutes then contact a medical professional ASAP\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eActive ingredients 40 grams per Litre Potassium Hydroxide  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUN1813 Classified 8 Corrosive Dangerous Good \u003c\/strong\u003e\u003c\/p\u003e","brand":"GHP","offers":[{"title":"Default Title","offer_id":4969825337380,"sku":"PH0500","price":22.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/PHRaise500mlfront.png?v=1729372731"},{"product_id":"110litrereservoirbincwlid-600hx420wx570l-black","title":"110 Litre Reservoir Bin with Lid 600H x 420W x 570L Black Heavy Duty","description":"\u003cp\u003eThe Hydroponic Reservoir Tank is the foundation of any hydroponic or aquaponic system, designed to store and manage the nutrient solution that your plants rely on for growth. Whether you're running a small home garden or a larger scale commercial system, a quality sturdy reservoir is crucial for supplying your system with a continuous flow of nutrients  without frequent refills.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions 600mm High x 420mm Wide x 570mm Long \u003c\/li\u003e\n\u003cli\u003eDurable Construction: Built from high-quality, food-safe, UV-resistant materials, these tanks are designed to withstand the rigors of hydroponic gardening, ensuring long-lasting performance even in demanding environments.\u003c\/li\u003e\n\u003cli\u003eCompatible with All Hydroponic Systems: Ideal for use in deep water culture (DWC), nutrient film technique (NFT), recirculating, aeroponics, and flood-and-drain (Ebb and Flow) systems.\u003c\/li\u003e\n\u003cli\u003eWater Temperature Control: Larger reservoirs can help buffer temperature fluctuations, providing a more stable growing environment for temperature-sensitive plants.\u003c\/li\u003e\n\u003cli\u003eMaximize Efficiency: Larger reservoirs reduce the need for frequent water changes, saving you time and effort while ensuring your system runs smoothly\u003cb\u003e\u003cspan style=\"color: #ee0000;\"\u003e\u003co:p\u003e \u003c\/o:p\u003e\u003c\/span\u003e\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan style=\"color: #ee0000;\"\u003eShipping Notice\u003co:p\u003e\u003c\/o:p\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePlease note our Free shipping policy does not apply to this item due to its size and delivery costs\u003co:p\u003e\u003c\/o:p\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eWe do offer competitive shipping rates based on your location, which are automatically calculated at the checkout\u003co:p\u003e\u003c\/o:p\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eSome rural areas may incur additional rural delivery fees we will notify you before dispatch if this applies to your location\u003co:p\u003e\u003c\/o:p\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Generic Brand","offers":[{"title":"Default Title","offer_id":4982978084900,"sku":"RB0110","price":189.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/bin110-Copy.png?v=1780828914"},{"product_id":"195litrereservoirbincwlid-590hx580wx870l-black","title":"195 Litre Reservoir Bin with Lid 590H x 580W x 870L Black Heavy Duty","description":"\u003cp\u003eThe Hydroponic Reservoir Tank is the foundation of any hydroponic or aquaponic system, designed to store and manage the nutrient solution that your plants rely on for growth. Whether you're running a small home garden or a larger scale commercial system, a quality sturdy reservoir is crucial for supplying your system with a continuous flow of nutrients  without frequent refills.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions 590mm High x 580mm Wide x 870mm Long \u003c\/li\u003e\n\u003cli\u003eDurable Construction: Built from high-quality, food-safe, UV-resistant materials, these tanks are designed to withstand the rigors of hydroponic gardening, ensuring long-lasting performance even in demanding environments.\u003c\/li\u003e\n\u003cli\u003eCompatible with All Hydroponic Systems: Ideal for use in deep water culture (DWC), nutrient film technique (NFT), recirculating, aeroponics, and flood-and-drain (Ebb and Flow) systems.\u003c\/li\u003e\n\u003cli\u003eWater Temperature Control: Larger reservoirs can help buffer temperature fluctuations, providing a more stable growing environment for temperature-sensitive plants.\u003c\/li\u003e\n\u003cli\u003eMaximize Efficiency: Larger reservoirs reduce the need for frequent water changes, saving you time and effort while ensuring your system runs smoothly\u003cb\u003e\u003cspan style=\"color: #ee0000;\"\u003e\u003co:p\u003e \u003c\/o:p\u003e\u003c\/span\u003e\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan style=\"color: #ee0000;\"\u003eShipping Notice\u003co:p\u003e\u003c\/o:p\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePlease note our Free shipping policy does not apply to this item due to its size and delivery costs\u003co:p\u003e\u003c\/o:p\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eWe do offer competitive shipping rates based on your location, which are automatically calculated at the checkout\u003co:p\u003e\u003c\/o:p\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eSome rural areas may incur additional rural delivery fees we will notify you before dispatch if this applies to your location\u003co:p\u003e\u003c\/o:p\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Generic Brand","offers":[{"title":"Default Title","offer_id":4982981492772,"sku":"RB0195","price":329.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/Bin195.png?v=1780828761"},{"product_id":"airline4mmtubing5metrepack","title":"Air Line 4mm Tubing 5 Metre Pack","description":"\u003cp\u003eEnhance your hydroponic or aquarium setup with our \u003cspan\u003econvenient\u003c\/span\u003e 4mm PVC air line tubing 5 metre pack, designed specifically for connecting air stones to air pumps. This durable PVC tubing ensures optimal airflow and efficient oxygen delivery to your plants or aquatic life, promoting healthier growth and vibrant ecosystems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMade from high quality PVC, our air line is flexible enough for easy installation while remaining robust to withstand wear and tear\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4mm diameter is compatible with most air stones and pumps, making it a versatile choice \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEngineered to minimize kinks and blockages, this air line guarantees a steady flow of oxygen\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":5060699160612,"sku":"9325136060744","price":7.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirLine4mmTubing5MetrePack_5efe84ac-a847-441a-8bcc-ea4a36001a53.png?v=1729375269"},{"product_id":"air-line-tube-hose-check-valve","title":"Air Line Tube - Hose Check Valve","description":"\u003cp\u003e Air line Check Valves are a crucial component in any hydroponic or aeroponic system, designed to ensure the smooth and efficient flow of air from your air pump to your reservoir or grow pots \u0026amp; plants. This small but essential valve prevents backflow, allowing air to flow in only one direction. This stops any nutrient solution, water, or liquid from flowing back into the air pump, ensuring your system remains fully functional.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInlet and Outlet connection is 4mm suitable for 4mm tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt is even more important to ensure a check valve is used whenever an air pump is positioned at or below the waterline of a reservoir. Stay safe with an Airline Check Valve, inexpensive, easy and convenient to install\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":5060699717668,"sku":"9325136110319","price":3.3,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirLineHoseCheckValve.png?v=1730502850"},{"product_id":"airlinesilicontubing4mmpermetre","title":"Air Line Silicon Tubing 4mm Per Metre","description":"\u003cp\u003eEnhance your hydroponic or aquarium setup with our high grade super flexible 4mm silicon air line tubing, designed specifically for connecting air stones to air pumps. This durable tubing ensures optimal airflow and efficient oxygen delivery to your plants or aquatic life, promoting healthier growth and vibrant ecosystems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMade from high quality silicon, our air line is super flexible for easy installation while remaining robust to withstand wear and tear\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4mm diameter is compatible with most air stones and pumps, making it a versatile choice \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEngineered to minimize kinks and blockages, this air line guarantees a steady flow of oxygen\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":5060700176420,"sku":"9325136003048","price":2.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirLineSiliconTubing4mmPerMetre.png?v=1716266802"},{"product_id":"air-stone-ceramic-disc-100mm-12-litres-minute-output","title":"Air Stone Ceramic Disc 100mm - 12 Litres \/ Minute Output","description":"\u003cp\u003eBoost oxygen levels and enhance the health of your plants and aquatic life with our ceramic air stone. Ideal for both hydroponics and aquarium systems, this essential tool ensures efficient aeration, promoting vibrant growth and a thriving ecosystem. Ensuring optimal oxygen levels in your reservoir and nutrient solution during warmer months, as higher temperatures can decrease the amount of dissolved oxygen in the water. Keeping the solution well aerated helps maintain healthy conditions for your plants\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur air stone creates a fine mist of bubbles that increases the surface area for oxygen exchange, ensuring optimal oxygen saturation for plants and fish\u003c\/li\u003e\n\u003cli\u003ePerfect for hydroponic setups and aquariums, this air stone is designed to meet the needs of various applications, providing vital support for both plant roots and aquatic life\u003c\/li\u003e\n\u003cli\u003eMade from quality materials, our air stone is built to last, withstanding continuous use in both fresh and saltwater environments\u003c\/li\u003e\n\u003cli\u003eSimply connect the air stone to your air pump with a standard air line, and watch as it transforms your system's oxygenation efficiency\u003c\/li\u003e\n\u003cli\u003eInlet connection is 4mm suitable for 4mm tubing\u003c\/li\u003e\n\u003cli\u003eTo ensure best performance, use an air pump with a minimum output of 12 litres per minute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eImprove your hydroponic or aquarium system and experience the benefits of improved aeration for a flourishing environment\u003c\/p\u003e","brand":"Generic Brand","offers":[{"title":"Default Title","offer_id":5060700667940,"sku":"ASD100","price":9.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirStoneCeramicDisc100mm_2.png?v=1729371575"},{"product_id":"air-stone-12inch-300mm-2-litres-minute-output-aquaone","title":"Air Stone 12inch - 300mm - 2 Litres \/ Minute Output - Aquaone","description":"\u003cp\u003eBoost oxygen levels and enhance the health of your plants and aquatic life with our quality air stones. Ideal for both hydroponics and aquarium systems, this essential tool ensures efficient aeration, promoting vibrant growth and a thriving ecosystem. Ensuring optimal oxygen levels in your reservoir and nutrient solution during warmer months, as higher temperatures can decrease the amount of dissolved oxygen in the water. Keeping the solution well aerated helps maintain healthy conditions for your plants\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur air stone creates a fine mist of bubbles that increases the surface area for oxygen exchange, ensuring optimal oxygen saturation for plants and fish\u003c\/li\u003e\n\u003cli\u003ePerfect for hydroponic setups and aquariums, this air stone is designed to meet the needs of various applications, providing vital support for both plant roots and aquatic life\u003c\/li\u003e\n\u003cli\u003eMade from quality materials, our air stone is built to last, withstanding continuous use in both fresh and saltwater environments\u003c\/li\u003e\n\u003cli\u003eSimply connect the air stone to your air pump with a standard air line, and watch as it transforms your system's oxygenation efficiency\u003c\/li\u003e\n\u003cli\u003eInlet connection is 4mm suitable for 4mm tubing\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003eTo ensure best performance, use an air pump with a minimum output of 2 litres per minute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eImprove your hydroponic or aquarium system and experience the benefits of improved aeration for a flourishing environment\u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":5060701388836,"sku":"9325136002478","price":5.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirStone12inch-300mmAquaone.png?v=1729371389"},{"product_id":"air-stone-ceramic-disc-132mm-14-litres-minute-output","title":"Air Stone Ceramic Disc 132mm - 14 Litres \/ Minute Output","description":"\u003cp\u003eBoost oxygen levels and enhance the health of your plants and aquatic life with our ceramic air stone. Ideal for both hydroponics and aquarium systems, this essential tool ensures efficient aeration, promoting vibrant growth and a thriving ecosystem. Ensuring optimal oxygen levels in your reservoir and nutrient solution during warmer months, as higher temperatures can decrease the amount of dissolved oxygen in the water. Keeping the solution well aerated helps maintain healthy conditions for your plants\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur air stone creates a fine mist of bubbles that increases the surface area for oxygen exchange, ensuring optimal oxygen saturation for plants and fish\u003c\/li\u003e\n\u003cli\u003ePerfect for hydroponic setups and aquariums, this air stone is designed to meet the needs of various applications, providing vital support for both plant roots and aquatic life\u003c\/li\u003e\n\u003cli\u003eMade from quality materials, our air stone is built to last, withstanding continuous use in both fresh and saltwater environments\u003c\/li\u003e\n\u003cli\u003eSimply connect the air stone to your air pump with a standard air line, and watch as it transforms your system's oxygenation efficiency\u003c\/li\u003e\n\u003cli\u003eInlet connection is 4mm suitable for 4mm tubing\u003c\/li\u003e\n\u003cli\u003eTo ensure best performance, use an air pump with a minimum output of 14 litres per minute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eImprove your hydroponic or aquarium system and experience the benefits of improved aeration for a flourishing environment\u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e","brand":"Generic Brand","offers":[{"title":"Default Title","offer_id":5060702011428,"sku":"ASD132","price":14.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirStoneCeramicDisc132mm_2_83163c66-3553-410d-9217-8462cad34e0a.png?v=1729371599"},{"product_id":"air-stone-4inch-100mm-1-litre-minute-output-aquaone","title":"Air Stone 4inch - 100mm - 1 Litre \/ Minute Output - Aquaone","description":"\u003cp\u003eBoost oxygen levels and enhance the health of your plants and aquatic life with our quality air stones. Ideal for both hydroponics and aquarium systems, this essential tool ensures efficient aeration, promoting vibrant growth and a thriving ecosystem. Ensuring optimal oxygen levels in your reservoir and nutrient solution during warmer months, as higher temperatures can decrease the amount of dissolved oxygen in the water. Keeping the solution well aerated helps maintain healthy conditions for your plants\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur air stone creates a fine mist of bubbles that increases the surface area for oxygen exchange, ensuring optimal oxygen saturation for plants and fish\u003c\/li\u003e\n\u003cli\u003ePerfect for hydroponic setups and aquariums, this air stone is designed to meet the needs of various applications, providing vital support for both plant roots and aquatic life\u003c\/li\u003e\n\u003cli\u003eMade from quality materials, our air stone is built to last, withstanding continuous use in both fresh and saltwater environments\u003c\/li\u003e\n\u003cli\u003eSimply connect the air stone to your air pump with a standard air line, and watch as it transforms your system's oxygenation efficiency\u003c\/li\u003e\n\u003cli\u003eInlet connection is 4mm suitable for 4mm tubing\u003c\/li\u003e\n\u003cli\u003eTo ensure best performance, use an air pump with a minimum output of 1 litre per minute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eImprove your hydroponic or aquarium system and experience the benefits of improved aeration for a flourishing environment\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":5060703060004,"sku":"9325136002454","price":2.4,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirStone4inch-100mmAquaone.png?v=1729371245"},{"product_id":"air-stone-50mm-round-ball-25-litres-minute-output-aquaone","title":"Air Stone 50mm Round Ball - 2.5 Litres \/ Minute Output - Aquaone","description":"\u003cp\u003eBoost oxygen levels and enhance the health of your plants and aquatic life with our quality air stones. Ideal for both hydroponics and aquarium systems, this essential tool ensures efficient aeration, promoting vibrant growth and a thriving ecosystem. Ensuring optimal oxygen levels in your reservoir and nutrient solution during warmer months, as higher temperatures can decrease the amount of dissolved oxygen in the water. Keeping the solution well aerated helps maintain healthy conditions for your plants\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur air stone creates a fine mist of bubbles that increases the surface area for oxygen exchange, ensuring optimal oxygen saturation for plants and fish\u003c\/li\u003e\n\u003cli\u003ePerfect for hydroponic setups and aquariums, this air stone is designed to meet the needs of various applications, providing vital support for both plant roots and aquatic life\u003c\/li\u003e\n\u003cli\u003eMade from quality materials, our air stone is built to last, withstanding continuous use in both fresh and saltwater environments\u003c\/li\u003e\n\u003cli\u003eSimply connect the air stone to your air pump with a standard air line, and watch as it transforms your system's oxygenation efficiency\u003c\/li\u003e\n\u003cli\u003eInlet connection is 4mm suitable for 4mm tubing\u003c\/li\u003e\n\u003cli\u003eTo ensure best performance, use an air pump with a minimum output of 2.5 litres per minute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eImprove your hydroponic or aquarium system and experience the benefits of improved aeration for a flourishing environment\u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":5060704436260,"sku":"9325136017915","price":4.4,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirStone50mmRoundBallAquaone_4bee9d79-d6d7-44e6-a42a-da1333f6263a.png?v=1730502874"},{"product_id":"air-stone-6inch-150mm-12-litres-minute-output-aquaone","title":"Air Stone 6inch - 150mm - 1.2 Litres \/ Minute Output - Aquaone","description":"\u003cp\u003eBoost oxygen levels and enhance the health of your plants and aquatic life with our quality air stones. Ideal for both hydroponics and aquarium systems, this essential tool ensures efficient aeration, promoting vibrant growth and a thriving ecosystem. Ensuring optimal oxygen levels in your reservoir and nutrient solution during warmer months, as higher temperatures can decrease the amount of dissolved oxygen in the water. Keeping the solution well aerated helps maintain healthy conditions for your plants\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur air stone creates a fine mist of bubbles that increases the surface area for oxygen exchange, ensuring optimal oxygen saturation for plants and fish\u003c\/li\u003e\n\u003cli\u003ePerfect for hydroponic setups and aquariums, this air stone is designed to meet the needs of various applications, providing vital support for both plant roots and aquatic life\u003c\/li\u003e\n\u003cli\u003eMade from quality materials, our air stone is built to last, withstanding continuous use in both fresh and saltwater environments\u003c\/li\u003e\n\u003cli\u003eSimply connect the air stone to your air pump with a standard air line, and watch as it transforms your system's oxygenation efficiency\u003c\/li\u003e\n\u003cli\u003eInlet connection is 4mm suitable for 4mm tubing\u003c\/li\u003e\n\u003cli\u003eTo ensure best performance, use an air pump with a minimum output of 1.2 litres per minute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eImprove your hydroponic or aquarium system and experience the benefits of improved aeration for a flourishing environment\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":5060704993316,"sku":"9325136002461","price":3.2,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirStone6inch-150mmAquaone.png?v=1729371344"},{"product_id":"ph4calibrationsolution500mlbluelab","title":"pH 4 Calibration Solution 500ml - bluelab ®","description":"\u003cp\u003eEssential growers solution for use with all pH test equipment requiring calibration like bluelab pH meters, pH probes and any brand that needs calibration. \u003cspan\u003ebluelab solutions are manufactured to very high standards and National Institute of Standards and Technology (NIST) certified this traceable standard ensures your equipment lasts longer and maintains accuracy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e: pH measuring equipment is always calibrated to pH 7.0 \u003cstrong\u003efirst \u003c\/strong\u003e(buffer) then to pH 4.0 (slope) \u003cstrong\u003esecond.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvoid cross-contamination\u003c\/li\u003e\n\u003cli\u003eDecanter into a smaller plastic cup\u003c\/li\u003e\n\u003cli\u003eDiscard sample after use\u003c\/li\u003e\n\u003cli\u003eStore in a cool dark place\u003c\/li\u003e\n\u003cli\u003eStore with lid secured tightly\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"bluelab","offers":[{"title":"Default Title","offer_id":9335385784356,"sku":"9421024920319","price":32.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/pH4CalibrationSolution500mlbluelab_67d64ade-c8bb-4384-be28-33f15739ec22.png?v=1722990352"},{"product_id":"ph7calibrationsolution500mlbluelab","title":"pH 7 Calibration Solution 500ml - bluelab ®","description":"\u003cp\u003eEssential growers solution for use with all pH test equipment requiring calibration like bluelab pH meters, pH probes and any brand that needs calibration. \u003cspan\u003ebluelab solutions are manufactured to very high standards and National Institute of Standards and Technology (NIST) certified this traceable standard ensures your equipment lasts longer and maintains accuracy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e: pH measuring equipment is always calibrated to pH 7.0 \u003cstrong\u003efirst \u003c\/strong\u003e(buffer) then to pH 4.0 (slope) \u003cstrong\u003esecond.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvoid cross-contamination\u003c\/li\u003e\n\u003cli\u003eDecanter into a smaller plastic cup\u003c\/li\u003e\n\u003cli\u003eDiscard sample after use\u003c\/li\u003e\n\u003cli\u003eStore in a cool dark place\u003c\/li\u003e\n\u003cli\u003eStore with lid secured tightly\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"bluelab","offers":[{"title":"Default Title","offer_id":9335389159460,"sku":"9421024920302","price":32.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/pH7CalibrationSolution500mlbluelab_d09a709b-bcc2-4feb-bc22-78fc3ef176cb.png?v=1722990412"},{"product_id":"kci-storage-solution-for-ph-probe-250ml-bluelab","title":"KCI Storage Solution for pH Probe 250ml - bluelab ®","description":"\u003cp\u003eKCI solution to store and hydrate your bluelab pH probes. It is extremely important to care for and store pH probes correctly. pH probes are sensitive glass instruments which age through normal use. The life and performance of pH probes is reduced heavily when they are stored dry. KCl storage solution is made specifically for use with pH test equipment. It is designed to increase response time and maximize the life of bluelab pH pens and pH probes. It will also work with any other brand of pH test equipment requiring hydration and storage. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ebluelab solutions are manufactured to very high standards and National Institute of Standards and Technology (NIST) certified this traceable standard ensures your equipment lasts longer and maintains accuracy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse the KCl solution to hydrate and store the pH pen\/probe in after use\u003c\/li\u003e\n\u003cli\u003eAlways keep your pH probe hydrated - \u003cstrong\u003eIf it dries, it dies! \u003c\/strong\u003eCheck your probe even if not in use at least monthly and hydrate as required\u003c\/li\u003e\n\u003cli\u003eAlways follow the manufacturer’s instructions for use and care of your pH equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIdeal for use with the following Bluelab products or any other brand that requires hydration and storage:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ebluelab pH Pen\u003c\/li\u003e\n\u003cli\u003ebluelab Soil pH Pen\u003c\/li\u003e\n\u003cli\u003ebluelab pH Probes\u003c\/li\u003e\n\u003cli\u003ebluelab Soil pH Probes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"bluelab","offers":[{"title":"Default Title","offer_id":9335461740580,"sku":"9421024920852","price":39.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/pHProbeKCIStorageSolution250mlbluelab_f4196f54-0c91-4a76-b381-893fac47bef2.png?v=1722990536"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/collections\/growshop-collection-hydroponic.jpg?v=1500440533","url":"https:\/\/growshop.co.nz\/collections\/hydroponic\/growing-systems.oembed","provider":"growshop.co.nz","version":"1.0","type":"link"}