{"title":"Aquaone","description":"","products":[{"product_id":"air-pump-160-litres-per-hour-1-outlet-aquaone-precision-2500","title":"Air Pump 160 Litres Per Hour 1 Outlet - Aquaone Precision 2500","description":"\u003cp\u003eAir pumps improve hydroponic system aeration performance and overall water quality by increasing water flow which helps to eliminate localised build-up of nutrients and additives. This makes for happy and healthy plants.\u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp\u003eHigh quality robust units that have been built to last with near silent operation. Simple diaphragm replacement can be achieved if required\u003c\/p\u003e\n\u003cp\u003eOutlet suits standard 4mm airline tubing\u003c\/p\u003e\n\u003cp\u003eDecide where you are going to position the air pump. Remember the pump must remain accessible for maintenance and avoid placing the pump on a carpeted surface. Where possible place the pump above the reservoir, If this is not possible then ensure that a check valve (sold separately) is fitted to the airline, failure to do so may damage your air pump \u0026amp; void your Guarantee. Ensure the check valve is inserted correctly, they only flow one way. Attach one end of the air line into your air stone and the other into the outlet of your pump.\u003c\/p\u003e\n\u003cp\u003eEnsure the pump is not going to vibrate off what ever surface you place it on.\u003c\/p\u003e\n\u003cp\u003eRemember to arrange a drip loop.\u003c\/p\u003e\n\u003cp\u003eIt is essential to replace the air stone regulary every 6 months or when it shows signs of deterioration. If being used in salt water a ceramic air stone is recommended.\u003c\/p\u003e\n\u003cp\u003eProblem solving if the Pump does not work:\u003c\/p\u003e\n\u003cp\u003eEnsure the plug is inserted correctly and the switch is in the on position and also your power outlet does have power and a circuit breaker hasn't been triggered.\u003c\/p\u003e\n\u003cp\u003eIf the pump motor is working but there is no air coming out of the pump or the pump is very noisy. Check that the air line is not kinked, Check the air stone and replace if needed. There is a rubber diaphragm inside the pump which may have warn out and may require replacing.\u003c\/p\u003e\n\u003cp\u003eThis unit uses 2.5 watts of power\u003c\/p\u003e\n\u003cp\u003eIs it a good idea to aerate the nutrient solution?\u003c\/p\u003e\n\u003cp\u003eYes, especially when solution temperatures start to rise during the warmer months as warm water can’t retain as much dissolved oxygen as cool water. \u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":39217421325,"sku":"9325136000009","price":18.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirPump160Litre-Hour1Outlet-AquaonePrecision250.png?v=1731725153"},{"product_id":"water-pump-1300-moray-1100-litres-per-hour-14m-mhh","title":"Water Pump 1300 Moray -1100 Litres Per Hour - 1.4 metre max head height","description":"\u003cp\u003e\u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e Water pumps provide excellent water circulation and aeration in any Hydroponic system, Custom Irrigation systems, Aquaponics, Aquariums, Ponds, Fountains \u0026amp; Waterfalls. Energy efficient, quiet operation, reliable and versatile. Fully submersible oil free motor ensures no toxic chemicals are released into the reservoir. These multipurpose submersible pumps can also be used for running water anywhere it needs to be pumped. Easily taken apart for cleaning, ensuring hassle-free upkeep. \u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e pumps are available in a range of sizes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt with salt resistant materials - Can be \u003cspan\u003eused in fresh or salt water \u003c\/span\u003e\u003cspan\u003ecorrosive environments\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePump uses 14.6 watts of power\u003c\/li\u003e\n\u003cli\u003ePump maximum flow rate 1100 Litres Per Hour at pump outlet\u003c\/li\u003e\n\u003cli\u003ePump maximum head height 1.4 metres\u003c\/li\u003e\n\u003cli\u003e19mm Pump outlet hose connection \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the pumps are being used in salt water, they must be checked regularly for build-up of calcium and other deposits. To maximise the life of your pump, it is recommended to clean the pump casing and the impeller every 6 - 8 weeks or earlier if flow has decreased significantly. Prior to cleaning, disconnect the pump from the electrical power supply. The casing of the pump and the strainer can be cleaned with a firm brush\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43605651661,"sku":"9325136029253","price":59.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/WaterPump1300Moray-1100LitresPerHour1.4mMh_h.png?v=1715627851"},{"product_id":"water-pump-2300-moray-2200-litres-per-hour-22m-mhh","title":"Water Pump 2300 Moray -2200 Litres Per Hour - 2.2 metre max head height","description":"\u003cp\u003e\u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e Water pumps provide excellent water circulation and aeration in any Hydroponic system, Custom Irrigation systems, Aquaponics, Aquariums, Ponds, Fountains \u0026amp; Waterfalls. Energy efficient, quiet operation, reliable and versatile. Fully submersible oil free motor ensures no toxic chemicals are released into the reservoir. These multipurpose submersible pumps can also be used for running water anywhere it needs to be pumped. Easily taken apart for cleaning, ensuring hassle-free upkeep. \u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e pumps are available in a range of sizes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt with salt resistant materials - Can be \u003cspan\u003eused in fresh or salt water \u003c\/span\u003e\u003cspan\u003ecorrosive environments\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePump uses 30 watts of power\u003c\/li\u003e\n\u003cli\u003ePump maximum flow rate 2200 Litres Per Hour at pump outlet\u003c\/li\u003e\n\u003cli\u003ePump maximum head height 2.2 metres\u003c\/li\u003e\n\u003cli\u003e19mm Pump outlet hose connection \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the pumps are being used in salt water, they must be checked regularly for build-up of calcium and other deposits. To maximise the life of your pump, it is recommended to clean the pump casing and the impeller every 6 - 8 weeks or earlier if flow has decreased significantly. Prior to cleaning, disconnect the pump from the electrical power supply. The casing of the pump and the strainer can be cleaned with a firm brush\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43605908301,"sku":"9325136029277","price":90.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/WaterPump2300Moray-2200LitresPerHour2.2mMh_h.png?v=1715643924"},{"product_id":"water-heater-200w-thermosafe-aquaone","title":"Water Heater 200w Thermosafe - Aquaone","description":"\u003cp\u003eMaintaining water temperature is an essential requirement for keeping hydroponic plants happy and healthy. Aqua One ThermoSafe heaters are made from high quality quartz which makes them durable and shatter resistant. The thermal cut out protection safeguards the heater from damage if accidentally exposed to water shortage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple to use, with an easy to read temperature guide, Aqua One ThermoSafe heaters are the optimum choice for your reservoir\u003c\/li\u003e\n\u003cli\u003eHigh quality heater with shatter resistant Quartz glass and Microchip controlled thermal cut-off\u003c\/li\u003e\n\u003cli\u003eFully submersible with simple installation with suction cups provided and Easy to read temperature guide Indicator light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect the proper wattage heater for your reservoir, normally 1 watt will heat 1 litre of water. For example a 200W heater is required for a 180 to 200L reservoir.\u003c\/p\u003e\n\u003cp\u003ePosition the heater in the reservoir the best position is near a strong water flow. Use the suction caps provided to fasten the heater to the reservoir. Suction caps should be positioned on the top third of the heater not on the heating element. Do not plug the heater in unless submersed in water.\u003c\/p\u003e\n\u003cp\u003eAlways allow 10-15 minutes for the heater to acclimate to the reservoir temperature before plugging the unit in.\u003c\/p\u003e\n\u003cp\u003ePlug the power cord into the power socket and arrange a “drip loop” and turn on.\u003c\/p\u003e\n\u003cp\u003eTo set the heater, use the control knob at the top of the heater to adjust to the desired temperature. Continue turning the knob until the preferred temperature is displayed in the window on the front of the heater.\u003c\/p\u003e\n\u003cp\u003eA light will come on when the heater is working, It will switch off when it reaches the set temperature.\u003c\/p\u003e\n\u003cp\u003eYou can confirm your set temperature with an accurate thermometer. The thermometer should be placed at the opposite end of the reservoir to the heater. A small variation between the heater’s set temperature and the thermometers reading is normal.\u003c\/p\u003e\n\u003cp\u003eAlways disconnect the heaters power supply prior to working on the reservoir hardware\u003c\/p\u003e\n\u003cp\u003eIf removing the heater from the reservoir, turn it off at the power supply, wait 5-10 minutes to allow it to cool, and then remove it.\u003c\/p\u003e\n\u003cp\u003eIf the heater is cracked and\/or has moisture inside it, turn the power off at the main power supply, unplug the unit and remove it from the reservoir.\u003c\/p\u003e\n\u003cp\u003eDo not operate your Aqua One heater when it is not submerged in water. The water level must be maintained at the minimum water level line at all times.\u003c\/p\u003e\n\u003cp\u003eWhat temperature should my nutrient solution be?\u003c\/p\u003e\n\u003cp\u003eThe best temperature is between 18°C and 22°C. Any lower and growth will slow down and any higher and you will start to deprive the solution of oxygen. During summer, it is sometimes difficult to keep temperatures low enough. Generally, you will need to aerate the solution if the water temperature gets too high. The absolute maximum solution temperature is 32°C. Above this and the plant will begin to suffer. During winter, in most places, heating the solution is necessary\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43605913933,"sku":"9325136043952","price":47.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/200wWaterHeaterThermosafeAquaone_2.png?v=1719953099"},{"product_id":"water-heater-glass-200w-275mm-long-aquaone","title":"Water Heater Glass 200w - 275mm Long  Aquaone","description":"\u003cp\u003eMaintaining correct water temperature is an essential requirement for keeping hydroponic plants happy and healthy. Aqua One Glass Heaters make it easy to maintain the correct temperature, by providing accurate adjustable temperature and exceptional durability. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuality and economical heater completely submersible with double insulation\u003c\/li\u003e\n\u003cli\u003eHeater thermostat with easy to use temperature settings, temperature range from 20°C - 34°C\u003c\/li\u003e\n\u003cli\u003eAutomatic shut off and ‘on’ light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect the proper wattage heater for your reservoir, normally 1 watt will heat 1 litre of water. For example a 200W heater is required for a 180 to 200L reservoir.\u003c\/p\u003e\n\u003cp\u003ePosition the heater in the reservoir the best position is near a strong water flow. Use the suction caps provided to fasten the heater to the reservoir. Suction caps should be positioned on the top third of the heater not on the heating element. Do not plug the heater in unless submersed in water.\u003c\/p\u003e\n\u003cp\u003eAlways allow 10-15 minutes for the heater to acclimate to the reservoir temperature before plugging the unit in.\u003c\/p\u003e\n\u003cp\u003ePlug the power cord into the power socket and arrange a “drip loop” and turn on.\u003c\/p\u003e\n\u003cp\u003eTo set the heater, use the purple control knob at the top of the heater to adjust to the desired temperature. Continue turning the knob until the preferred temperature is displayed in the window on the front of the heater.\u003c\/p\u003e\n\u003cp\u003eA light will come on when the heater is working, It will switch off when it reaches the set temperature.\u003c\/p\u003e\n\u003cp\u003eYou can confirm your set temperature with an accurate thermometer. The thermometer should be placed at the opposite end of the reservoir to the heater. A small variation between the heater’s set temperature and the thermometers reading is normal.\u003c\/p\u003e\n\u003cp\u003eAlways disconnect the heaters power supply prior to working on the reservoir hardware\u003c\/p\u003e\n\u003cp\u003eIf removing the heater from the reservoir, turn it off at the power supply, wait 5-10 minutes to allow it to cool, and then remove it.\u003c\/p\u003e\n\u003cp\u003eIf the heater is cracked and\/or has moisture inside it, turn the power off at the main power supply, unplug the unit and remove it from the reservoir.\u003c\/p\u003e\n\u003cp\u003eDo not operate your Aqua One heater when it is not submerged in water. The water level must be maintained at the minimum water level line at all times.\u003c\/p\u003e\n\u003cp\u003eWhat temperature should my nutrient solution be?\u003c\/p\u003e\n\u003cp\u003eThe best temperature is between 18°C and 22°C. Any lower and growth will slow down and any higher and you will start to deprive the solution of oxygen. During summer, it is sometimes difficult to keep temperatures low enough. Generally, you will need to aerate the solution if the water temperature gets too high. The absolute maximum solution temperature is 32°C. Above this and the plant will begin to suffer. During winter, in most places, heating the solution is necessary\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43605920269,"sku":"9325136030051","price":37.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/200wWaterHeaterGlass275mmAquaone_2.png?v=1719953062"},{"product_id":"water-pump-4900-moray-4800-litres-per-hour-34m-mhh","title":"Water Pump 4900 Moray - 4800 Litres Per Hour - 3.4 metre max head height","description":"\u003cp\u003e\u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e Water pumps provide excellent water circulation and aeration in any Hydroponic system, Custom Irrigation systems, Aquaponics, Aquariums, Ponds, Fountains \u0026amp; Waterfalls. Energy efficient, quiet operation, reliable and versatile. Fully submersible oil free motor ensures no toxic chemicals are released into the reservoir. These multipurpose submersible pumps can also be used for running water anywhere it needs to be pumped. Easily taken apart for cleaning, ensuring hassle-free upkeep. \u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e pumps are available in a range of sizes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt with salt resistant materials - Can be \u003cspan\u003eused in fresh or salt water \u003c\/span\u003e\u003cspan\u003ecorrosive environments\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePump uses 100 watts of power\u003c\/li\u003e\n\u003cli\u003ePump maximum flow rate 4800 Litres Per Hour at pump outlet\u003c\/li\u003e\n\u003cli\u003ePump maximum head height 3.4 metres\u003c\/li\u003e\n\u003cli\u003e19mm Pump outlet hose connection \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the pumps are being used in salt water, they must be checked regularly for build-up of calcium and other deposits. To maximise the life of your pump, it is recommended to clean the pump casing and the impeller every 6 - 8 weeks or earlier if flow has decreased significantly. Prior to cleaning, disconnect the pump from the electrical power supply. The casing of the pump and the strainer can be cleaned with a firm brush\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43606008269,"sku":"9325136029314","price":239.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/WaterPump4900Moray-4800LitresPerHour3.4mMh_h.png?v=1715641614"},{"product_id":"water-pump-480-moray-720-litres-per-hour-96m-mhh","title":"Water Pump 480 Moray - 720 Litres Per Hour - .96 metre max head height","description":"\u003cp\u003e\u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e Water pumps provide excellent water circulation and aeration in any Hydroponic system, Custom Irrigation systems, Aquaponics, Aquariums, Ponds, Fountains \u0026amp; Waterfalls. Energy efficient, quiet operation, reliable and versatile. Fully submersible oil free motor ensures no toxic chemicals are released into the reservoir. These multipurpose submersible pumps can also be used for running water anywhere it needs to be pumped. Easily taken apart for cleaning, ensuring hassle-free upkeep. \u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e pumps are available in a range of sizes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt with salt resistant materials - Can be \u003cspan\u003eused in fresh or salt water \u003c\/span\u003e\u003cspan\u003ecorrosive environments\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePump uses 8.5 watts of power\u003c\/li\u003e\n\u003cli\u003ePump maximum flow rate 720 Litres Per Hour at pump outlet\u003c\/li\u003e\n\u003cli\u003ePump maximum head height 0.96 metres\u003c\/li\u003e\n\u003cli\u003e13mm Pump outlet hose connection \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the pumps are being used in salt water, they must be checked regularly for build-up of calcium and other deposits. To maximise the life of your pump, it is recommended to clean the pump casing and the impeller every 6 - 8 weeks or earlier if flow has decreased significantly. Prior to cleaning, disconnect the pump from the electrical power supply. The casing of the pump and the strainer can be cleaned with a firm brush\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43606027021,"sku":"9325136037913","price":39.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/WaterPump480Moray-720LitresPerHour.96mMh_h.png?v=1715715480"},{"product_id":"water-pump-3600-moray-3600-litres-per-hour-34m-mhh","title":"Water Pump 3600 Moray -3600 Litres Per Hour - 3.4 metre max head height","description":"\u003cp\u003e\u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e Water pumps provide excellent water circulation and aeration in any Hydroponic system, Custom Irrigation systems, Aquaponics, Aquariums, Ponds, Fountains \u0026amp; Waterfalls. Energy efficient, quiet operation, reliable and versatile. Fully submersible oil free motor ensures no toxic chemicals are released into the reservoir. These multipurpose submersible pumps can also be used for running water anywhere it needs to be pumped. Easily taken apart for cleaning, ensuring hassle-free upkeep. \u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e pumps are available in a range of sizes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt with salt resistant materials - Can be \u003cspan\u003eused in fresh or salt water \u003c\/span\u003e\u003cspan\u003ecorrosive environments\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePump uses 79 watts of power\u003c\/li\u003e\n\u003cli\u003ePump maximum flow rate 3600 Litres Per Hour at pump outlet\u003c\/li\u003e\n\u003cli\u003ePump maximum head height 3.4 metres\u003c\/li\u003e\n\u003cli\u003e19mm Pump outlet hose connection \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the pumps are being used in salt water, they must be checked regularly for build-up of calcium and other deposits. To maximise the life of your pump, it is recommended to clean the pump casing and the impeller every 6 - 8 weeks or earlier if flow has decreased significantly. Prior to cleaning, disconnect the pump from the electrical power supply. The casing of the pump and the strainer can be cleaned with a firm brush\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43606096333,"sku":"9325136029307","price":139.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/WaterPump3600Moray-3600LitresPerHour3.4mMh_h.png?v=1715641832"},{"product_id":"water-pump-360-moray-600-litres-per-hour-86m-mhh","title":"Water Pump 360 Moray - 600 Litres Per Hour - .86 metre max head height","description":"\u003cp\u003e\u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e Water pumps provide excellent water circulation and aeration in any Hydroponic system, Custom Irrigation systems, Aquaponics, Aquariums, Ponds, Fountains \u0026amp; Waterfalls. Energy efficient, quiet operation, reliable and versatile. Fully submersible oil free motor ensures no toxic chemicals are released into the reservoir. These multipurpose submersible pumps can also be used for running water anywhere it needs to be pumped. Easily taken apart for cleaning, ensuring hassle-free upkeep. \u003cspan rel=\"Moray\"\u003eMoray\u003c\/span\u003e pumps are available in a range of sizes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt with salt resistant materials - Can be \u003cspan\u003eused in fresh or salt water \u003c\/span\u003e\u003cspan\u003ecorrosive environments\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePump uses 6.5 watts of power\u003c\/li\u003e\n\u003cli\u003ePump maximum flow rate 600 Litres Per Hour at pump outlet\u003c\/li\u003e\n\u003cli\u003ePump maximum head height 0.86 metres\u003c\/li\u003e\n\u003cli\u003e13mm Pump outlet hose connection \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the pumps are being used in salt water, they must be checked regularly for build-up of calcium and other deposits. To maximise the life of your pump, it is recommended to clean the pump casing and the impeller every 6 - 8 weeks or earlier if flow has decreased significantly. Prior to cleaning, disconnect the pump from the electrical power supply. The casing of the pump and the strainer can be cleaned with a firm brush\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43606101325,"sku":"9325136037906","price":33.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/WaterPump360Moray-600LitresPerHour.86mMh_h.png?v=1715644137"},{"product_id":"water-heater-300w-thermosafe-aquaone","title":"Water Heater 300w Thermosafe - Aquaone","description":"\u003cp\u003eMaintaining water temperature is an essential requirement for keeping hydroponic plants happy and healthy. Aqua One ThermoSafe heaters are made from high quality quartz which makes them durable and shatter resistant. The thermal cut out protection safeguards the heater from damage if accidentally exposed to water shortage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple to use, with an easy to read temperature guide, Aqua One ThermoSafe heaters are the optimum choice for your reservoir\u003c\/li\u003e\n\u003cli\u003eHigh quality heater with shatter resistant Quartz glass and Microchip controlled thermal cut-off\u003c\/li\u003e\n\u003cli\u003eFully submersible with simple installation with suction cups provided and Easy to read temperature guide Indicator light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect the proper wattage heater for your reservoir, normally 1 watt will heat 1 litre of water. For example a 200W heater is required for a 180 to 200L reservoir.\u003c\/p\u003e\n\u003cp\u003ePosition the heater in the reservoir the best position is near a strong water flow. Use the suction caps provided to fasten the heater to the reservoir. Suction caps should be positioned on the top third of the heater not on the heating element. Do not plug the heater in unless submersed in water.\u003c\/p\u003e\n\u003cp\u003eAlways allow 10-15 minutes for the heater to acclimate to the reservoir temperature before plugging the unit in.\u003c\/p\u003e\n\u003cp\u003ePlug the power cord into the power socket and arrange a “drip loop” and turn on.\u003c\/p\u003e\n\u003cp\u003eTo set the heater, use the control knob at the top of the heater to adjust to the desired temperature. Continue turning the knob until the preferred temperature is displayed in the window on the front of the heater.\u003c\/p\u003e\n\u003cp\u003eA light will come on when the heater is working, It will switch off when it reaches the set temperature.\u003c\/p\u003e\n\u003cp\u003eYou can confirm your set temperature with an accurate thermometer. The thermometer should be placed at the opposite end of the reservoir to the heater. A small variation between the heater’s set temperature and the thermometers reading is normal.\u003c\/p\u003e\n\u003cp\u003eAlways disconnect the heaters power supply prior to working on the reservoir hardware\u003c\/p\u003e\n\u003cp\u003eIf removing the heater from the reservoir, turn it off at the power supply, wait 5-10 minutes to allow it to cool, and then remove it.\u003c\/p\u003e\n\u003cp\u003eIf the heater is cracked and\/or has moisture inside it, turn the power off at the main power supply, unplug the unit and remove it from the reservoir.\u003c\/p\u003e\n\u003cp\u003eDo not operate your Aqua One heater when it is not submerged in water. The water level must be maintained at the minimum water level line at all times.\u003c\/p\u003e\n\u003cp\u003eWhat temperature should my nutrient solution be?\u003c\/p\u003e\n\u003cp\u003eThe best temperature is between 18°C and 22°C. Any lower and growth will slow down and any higher and you will start to deprive the solution of oxygen. During summer, it is sometimes difficult to keep temperatures low enough. Generally, you will need to aerate the solution if the water temperature gets too high. The absolute maximum solution temperature is 32°C. Above this and the plant will begin to suffer. During winter, in most places, heating the solution is necessary\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43606159309,"sku":"9325136043976","price":49.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/300wWaterHeaterThermosafeAquaone_2.png?v=1719953209"},{"product_id":"water-heater-glass-300w-330mm-long-aquaone","title":"Water Heater Glass 300w - 330mm Long - Aquaone","description":"\u003cp\u003eMaintaining correct water temperature is an essential requirement for keeping hydroponic plants happy and healthy. Aqua One Glass Heaters make it easy to maintain the correct temperature, by providing accurate adjustable temperature and exceptional durability. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuality and economical heater completely submersible with double insulation\u003c\/li\u003e\n\u003cli\u003eHeater thermostat with easy to use temperature settings, temperature range from 20°C - 34°C\u003c\/li\u003e\n\u003cli\u003eAutomatic shut off and ‘on’ light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect the proper wattage heater for your reservoir, normally 1 watt will heat 1 litre of water. For example a 200W heater is required for a 180 to 200L reservoir.\u003c\/p\u003e\n\u003cp\u003ePosition the heater in the reservoir the best position is near a strong water flow. Use the suction caps provided to fasten the heater to the reservoir. Suction caps should be positioned on the top third of the heater not on the heating element. Do not plug the heater in unless submersed in water.\u003c\/p\u003e\n\u003cp\u003eAlways allow 10-15 minutes for the heater to acclimate to the reservoir temperature before plugging the unit in.\u003c\/p\u003e\n\u003cp\u003ePlug the power cord into the power socket and arrange a “drip loop” and turn on.\u003c\/p\u003e\n\u003cp\u003eTo set the heater, use the purple control knob at the top of the heater to adjust to the desired temperature. Continue turning the knob until the preferred temperature is displayed in the window on the front of the heater.\u003c\/p\u003e\n\u003cp\u003eA light will come on when the heater is working, It will switch off when it reaches the set temperature.\u003c\/p\u003e\n\u003cp\u003eYou can confirm your set temperature with an accurate thermometer. The thermometer should be placed at the opposite end of the reservoir to the heater. A small variation between the heater’s set temperature and the thermometers reading is normal.\u003c\/p\u003e\n\u003cp\u003eAlways disconnect the heaters power supply prior to working on the reservoir hardware\u003c\/p\u003e\n\u003cp\u003eIf removing the heater from the reservoir, turn it off at the power supply, wait 5-10 minutes to allow it to cool, and then remove it.\u003c\/p\u003e\n\u003cp\u003eIf the heater is cracked and\/or has moisture inside it, turn the power off at the main power supply, unplug the unit and remove it from the reservoir.\u003c\/p\u003e\n\u003cp\u003eDo not operate your Aqua One heater when it is not submerged in water. The water level must be maintained at the minimum water level line at all times.\u003c\/p\u003e\n\u003cp\u003eWhat temperature should my nutrient solution be?\u003c\/p\u003e\n\u003cp\u003eThe best temperature is between 18°C and 22°C. Any lower and growth will slow down and any higher and you will start to deprive the solution of oxygen. During summer, it is sometimes difficult to keep temperatures low enough. Generally, you will need to aerate the solution if the water temperature gets too high. The absolute maximum solution temperature is 32°C. Above this and the plant will begin to suffer. During winter, in most places, heating the solution is necessary\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43606167245,"sku":"9325136030075","price":39.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/300wWaterHeaterGlass330mmAquaone_2.png?v=1719953136"},{"product_id":"air-pump-360-litres-per-hour-2-outlet-aquaone-precision-7500","title":"Air Pump 360 Litres Per Hour 2 Outlet - Aquaone Precision 7500","description":"\u003cp\u003eAir pumps improve hydroponic system aeration performance and overall water quality by increasing water flow which helps to eliminate localised build-up of nutrients and additives. This makes for happy and healthy plants.\u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp\u003eHigh quality robust units that have been built to last with near silent operation. Simple diaphragm replacement can be achieved if required\u003c\/p\u003e\n\u003cp\u003eOutlets suit standard 4mm airline tubing\u003c\/p\u003e\n\u003cp\u003eDecide where you are going to position the air pump. Remember the pump must remain accessible for maintenance and avoid placing the pump on a carpeted surface. Where possible place the pump above the reservoir, If this is not possible then ensure that a check valve (sold separately) is fitted to the airline, failure to do so may damage your air pump \u0026amp; void your Guarantee. Ensure the check valve is inserted correctly, they only flow one way. Attach one end of the air line into your air stone and the other into the outlet of your pump.\u003c\/p\u003e\n\u003cp\u003eEnsure the pump is not going to vibrate off what ever surface you place it on.\u003c\/p\u003e\n\u003cp\u003eRemember to arrange a drip loop.\u003c\/p\u003e\n\u003cp\u003eIt is essential to replace the air stone regulary every 6 months or when it shows signs of deterioration. If being used in salt water a ceramic air stone is recommended.\u003c\/p\u003e\n\u003cp\u003eProblem solving if the Pump does not work:\u003c\/p\u003e\n\u003cp\u003eEnsure the plug is inserted correctly and the switch is in the on position and also your power outlet does have power and a circuit breaker hasn't been triggered.\u003c\/p\u003e\n\u003cp\u003eIf the pump motor is working but there is no air coming out of the pump or the pump is very noisy. Check that the air line is not kinked, Check the air stone and replace if needed. There is a rubber diaphragm inside the pump which may have warn out and may require replacing. \u003c\/p\u003e\n\u003cp\u003eThis unit uses 3.5 watts of power\u003c\/p\u003e\n\u003cp\u003eIs it a good idea to aerate the nutrient solution?\u003c\/p\u003e\n\u003cp\u003eYes, especially when solution temperatures start to rise during the warmer months as warm water can’t retain as much dissolved oxygen as cool water. \u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43606684301,"sku":"9325136000016","price":25.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirPump360Litre-Hour2Outlet-AquaonePrecision7500.png?v=1731725193"},{"product_id":"water-heater-glass-55w-185mm-long-aquaone","title":"Water Heater Glass 55w - 185mm Long - Aquaone","description":"\u003cp\u003eMaintaining correct water temperature is an essential requirement for keeping hydroponic plants happy and healthy. Aqua One Glass Heaters make it easy to maintain the correct temperature, by providing accurate adjustable temperature and exceptional durability. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuality and economical heater completely submersible with double insulation\u003c\/li\u003e\n\u003cli\u003eHeater thermostat with easy to use temperature settings, temperature range from 20°C - 34°C\u003c\/li\u003e\n\u003cli\u003eAutomatic shut off and ‘on’ light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect the proper wattage heater for your reservoir, normally 1 watt will heat 1 litre of water. For example a 200W heater is required for a 180 to 200L reservoir.\u003c\/p\u003e\n\u003cp\u003ePosition the heater in the reservoir the best position is near a strong water flow. Use the suction caps provided to fasten the heater to the reservoir. Suction caps should be positioned on the top third of the heater not on the heating element. Do not plug the heater in unless submersed in water.\u003c\/p\u003e\n\u003cp\u003eAlways allow 10-15 minutes for the heater to acclimate to the reservoir temperature before plugging the unit in.\u003c\/p\u003e\n\u003cp\u003ePlug the power cord into the power socket and arrange a “drip loop” and turn on.\u003c\/p\u003e\n\u003cp\u003eTo set the heater, use the purple control knob at the top of the heater to adjust to the desired temperature. Continue turning the knob until the preferred temperature is displayed in the window on the front of the heater.\u003c\/p\u003e\n\u003cp\u003eA light will come on when the heater is working, It will switch off when it reaches the set temperature.\u003c\/p\u003e\n\u003cp\u003eYou can confirm your set temperature with an accurate thermometer. The thermometer should be placed at the opposite end of the reservoir to the heater. A small variation between the heater’s set temperature and the thermometers reading is normal.\u003c\/p\u003e\n\u003cp\u003eAlways disconnect the heaters power supply prior to working on the reservoir hardware\u003c\/p\u003e\n\u003cp\u003eIf removing the heater from the reservoir, turn it off at the power supply, wait 5-10 minutes to allow it to cool, and then remove it.\u003c\/p\u003e\n\u003cp\u003eIf the heater is cracked and\/or has moisture inside it, turn the power off at the main power supply, unplug the unit and remove it from the reservoir.\u003c\/p\u003e\n\u003cp\u003eDo not operate your Aqua One heater when it is not submerged in water. The water level must be maintained at the minimum water level line at all times.\u003c\/p\u003e\n\u003cp\u003eWhat temperature should my nutrient solution be?\u003c\/p\u003e\n\u003cp\u003eThe best temperature is between 18°C and 22°C. Any lower and growth will slow down and any higher and you will start to deprive the solution of oxygen. During summer, it is sometimes difficult to keep temperatures low enough. Generally, you will need to aerate the solution if the water temperature gets too high. The absolute maximum solution temperature is 32°C. Above this and the plant will begin to suffer. During winter, in most places, heating the solution is necessary\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43611186125,"sku":"9325136030013","price":35.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/55wWaterHeaterGlass185mmAquaone_2.png?v=1719952800"},{"product_id":"water-heater-50w-thermosafe-aquaone","title":"Water Heater 50w Thermosafe - Aquaone","description":"\u003cp\u003eMaintaining water temperature is an essential requirement for keeping hydroponic plants happy and healthy. Aqua One ThermoSafe heaters are made from high quality quartz which makes them durable and shatter resistant. The thermal cut out protection safeguards the heater from damage if accidentally exposed to water shortage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple to use, with an easy to read temperature guide, Aqua One ThermoSafe heaters are the optimum choice for your reservoir\u003c\/li\u003e\n\u003cli\u003eHigh quality heater with shatter resistant Quartz glass and Microchip controlled thermal cut-off\u003c\/li\u003e\n\u003cli\u003eFully submersible with simple installation with suction cups provided and Easy to read temperature guide Indicator light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect the proper wattage heater for your reservoir, normally 1 watt will heat 1 litre of water. For example a 200W heater is required for a 180 to 200L reservoir.\u003c\/p\u003e\n\u003cp\u003ePosition the heater in the reservoir the best position is near a strong water flow. Use the suction caps provided to fasten the heater to the reservoir. Suction caps should be positioned on the top third of the heater not on the heating element. Do not plug the heater in unless submersed in water.\u003c\/p\u003e\n\u003cp\u003eAlways allow 10-15 minutes for the heater to acclimate to the reservoir temperature before plugging the unit in.\u003c\/p\u003e\n\u003cp\u003ePlug the power cord into the power socket and arrange a “drip loop” and turn on.\u003c\/p\u003e\n\u003cp\u003eTo set the heater, use the control knob at the top of the heater to adjust to the desired temperature. Continue turning the knob until the preferred temperature is displayed in the window on the front of the heater.\u003c\/p\u003e\n\u003cp\u003eA light will come on when the heater is working, It will switch off when it reaches the set temperature.\u003c\/p\u003e\n\u003cp\u003eYou can confirm your set temperature with an accurate thermometer. The thermometer should be placed at the opposite end of the reservoir to the heater. A small variation between the heater’s set temperature and the thermometers reading is normal.\u003c\/p\u003e\n\u003cp\u003eAlways disconnect the heaters power supply prior to working on the reservoir hardware\u003c\/p\u003e\n\u003cp\u003eIf removing the heater from the reservoir, turn it off at the power supply, wait 5-10 minutes to allow it to cool, and then remove it.\u003c\/p\u003e\n\u003cp\u003eIf the heater is cracked and\/or has moisture inside it, turn the power off at the main power supply, unplug the unit and remove it from the reservoir.\u003c\/p\u003e\n\u003cp\u003eDo not operate your Aqua One heater when it is not submerged in water. The water level must be maintained at the minimum water level line at all times.\u003c\/p\u003e\n\u003cp\u003eWhat temperature should my nutrient solution be?\u003c\/p\u003e\n\u003cp\u003eThe best temperature is between 18°C and 22°C. Any lower and growth will slow down and any higher and you will start to deprive the solution of oxygen. During summer, it is sometimes difficult to keep temperatures low enough. Generally, you will need to aerate the solution if the water temperature gets too high. The absolute maximum solution temperature is 32°C. Above this and the plant will begin to suffer. During winter, in most places, heating the solution is necessary\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43611198797,"sku":"9325136043914","price":45.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/50wWaterHeaterThermosafeAquaone_2.png?v=1719952758"},{"product_id":"air-pump-800-litres-per-hour-4-outlet-adjustable-aquaone-precision-12000","title":"Air Pump 800 Litres Per Hour 4 Outlet Adjustable - Aquaone Precision 12000","description":"\u003cp\u003eAir pumps improve hydroponic system aeration performance and overall water quality by increasing water flow which helps to eliminate localised build-up of nutrients and additives. This makes for happy and healthy plants.\u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp\u003eHigh quality robust units that have been built to last with near silent operation. Simple diaphragm replacement can be achieved if required\u003c\/p\u003e\n\u003cp\u003eOutlets suit standard 4mm airline tubing\u003c\/p\u003e\n\u003cp\u003eDecide where you are going to position the air pump. Remember the pump must remain accessible for maintenance and avoid placing the pump on a carpeted surface. Where possible place the pump above the reservoir, If this is not possible then ensure that a check valve (sold separately) is fitted to the airline, failure to do so may damage your air pump \u0026amp; void your Guarantee. Ensure the check valve is inserted correctly, they only flow one way. Attach one end of the air line into your air stone and the other into the outlet of your pump.\u003c\/p\u003e\n\u003cp\u003eEnsure the pump is not going to vibrate off what ever surface you place it on.\u003c\/p\u003e\n\u003cp\u003eRemember to arrange a drip loop.\u003c\/p\u003e\n\u003cp\u003eIt is essential to replace the air stone regulary every 6 months or when it shows signs of deterioration. If being used in salt water a ceramic air stone is recommended.\u003c\/p\u003e\n\u003cp\u003eProblem solving if the Pump does not work:\u003c\/p\u003e\n\u003cp\u003eEnsure the plug is inserted correctly and the switch is in the on position and also your power outlet does have power and a circuit breaker hasn't been triggered.\u003c\/p\u003e\n\u003cp\u003eIf the pump motor is working but there is no air coming out of the pump or the pump is very noisy. Check that the air line is not kinked, Check the air stone and replace if needed. There is a rubber diaphragm inside the pump which may have warn out and may require replacing. \u003c\/p\u003e\n\u003cp\u003eThis unit uses 9.4 watts of power\u003c\/p\u003e\n\u003cp\u003eIs it a good idea to aerate the nutrient solution?\u003c\/p\u003e\n\u003cp\u003eYes, especially when solution temperatures start to rise during the warmer months as warm water can’t retain as much dissolved oxygen as cool water. \u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43611854861,"sku":"9325136000047","price":59.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirPump800Litre-Hour4OutletAdjustable-AquaonePrecision12000.png?v=1731725220"},{"product_id":"impeller-water-pump-replacement-for-3600-moray","title":"Impeller Water Pump Replacement for 3600 Moray","description":"\u003cp\u003e\u003cspan\u003eKeep your Aqua One Moray 3600 Water Pump running smoothly with our high-quality impeller replacement. Designed to fit perfectly, this replacement impeller ensures optimal performance and longevity for your pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically designed for the Aqua One Moray 3600 Water Pump\u003c\/li\u003e\n\u003cli\u003eMade from High quality - durable materials to withstand continuous use\u003c\/li\u003e\n\u003cli\u003eSimple to install, allowing you to replace the impeller without hassle\u003c\/li\u003e\n\u003cli\u003eRestores the pump's efficiency, ensuring consistent water circulation and aeration\u003c\/li\u003e\n\u003cli\u003eA great alternative to replacing the entire pump, saving you money\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43614123597,"sku":"9325136048803","price":60.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/IMPELLERWATERPUMPREPLACEMENTFOR3600MORAY_2.png?v=1730500990"},{"product_id":"impeller-water-pump-replacement-for-360-480-moray","title":"Impeller Water Pump Replacement for 360 \u0026 480 Moray","description":"\u003cp\u003e\u003cspan\u003eKeep your Aqua One Moray 360 \u0026amp; 480 Water Pump running smoothly with our high-quality impeller replacement. Designed to fit perfectly, this replacement impeller ensures optimal performance and longevity for your pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically designed for the Aqua One Moray 360 \u0026amp; 480 Water Pump\u003c\/li\u003e\n\u003cli\u003eMade from High quality - durable materials to withstand continuous use\u003c\/li\u003e\n\u003cli\u003eSimple to install, allowing you to replace the impeller without hassle\u003c\/li\u003e\n\u003cli\u003eRestores the pump's efficiency, ensuring consistent water circulation and aeration\u003c\/li\u003e\n\u003cli\u003eA great alternative to replacing the entire pump, saving you money\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43614142797,"sku":"9325136022018","price":15.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/ImpellerReplacementfor360_480MorayWaterPump_2.png?v=1730500943"},{"product_id":"impeller-water-pump-replacement-for-2300-moray","title":"Impeller Water Pump Replacement for 2300 Moray","description":"\u003cp\u003e\u003cspan\u003eKeep your Aqua One Moray 2300 Water Pump running smoothly with our high-quality impeller replacement. Designed to fit perfectly, this replacement impeller ensures optimal performance and longevity for your pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically designed for the Aqua One Moray 2300 Water Pump\u003c\/li\u003e\n\u003cli\u003eMade from High quality - durable materials to withstand continuous use\u003c\/li\u003e\n\u003cli\u003eSimple to install, allowing you to replace the impeller without hassle\u003c\/li\u003e\n\u003cli\u003eRestores the pump's efficiency, ensuring consistent water circulation and aeration\u003c\/li\u003e\n\u003cli\u003eA great alternative to replacing the entire pump, saving you money\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43614162445,"sku":"9325136030839","price":40.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/ImpellerReplacementfor2300MorayWaterPump_2.png?v=1730500968"},{"product_id":"impeller-water-pump-replacement-for-1300-moray","title":"Impeller Water Pump Replacement for 1300 Moray","description":"\u003cp\u003e\u003cspan\u003eKeep your Aqua One Moray 1300 Water Pump running smoothly with our high-quality impeller replacement. Designed to fit perfectly, this replacement impeller ensures optimal performance and longevity for your pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically designed for the Aqua One Moray 1300 Water Pump\u003c\/li\u003e\n\u003cli\u003eMade from High quality - durable materials to withstand continuous use\u003c\/li\u003e\n\u003cli\u003eSimple to install, allowing you to replace the impeller without hassle\u003c\/li\u003e\n\u003cli\u003eRestores the pump's efficiency, ensuring consistent water circulation and aeration\u003c\/li\u003e\n\u003cli\u003eA great alternative to replacing the entire pump, saving you money\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43614187085,"sku":"9325136022025","price":25.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/mpellerReplacementfor1300MorayWaterPump_2.png?v=1730501034"},{"product_id":"lamp-holder-e27-screw-socket-ceramic-with-lead-and-switch","title":"Lamp Holder E27 Screw Socket Ceramic with Lead and Switch","description":"\u003cp\u003eUsed for LED grow lamps or heat lamps in hydroponics and aquarium setups the Ceramic E27 Screw Lamp Holder Socket, complete with lead and inline switch. This quality socket is designed for durability and safety, making it perfect for a variety of lighting applications in indoor gardening and aquatic environments.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCeramic lamp holder provides excellent heat resistance and longevity, suitable for high-wattage lamps up to 200 watts \u003c\/li\u003e\n\u003cli\u003eCompatible with standard E27 lamps, allowing you to choose the best lighting for your plants or aquatic life\u003c\/li\u003e\n\u003cli\u003eControl your lighting effortlessly with the integrated switch, adding convenience to your setup\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43615454605,"sku":"9325136116557","price":28.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/LampholderSocketCeramicE27Screwc_wLeadandSwitch_4.png?v=1729381482"},{"product_id":"temperature-thermometer-small-digital-display-aquaone","title":"Temperature Thermometer Small Digital Display - Aquaone","description":"\u003cp\u003eMonitor your grow room, grow tent or any area with this \u003cspan lang=\"EN-US\"\u003eTemperature meter. U\u003c\/span\u003esed to measure the temperature in your environment. \u003co:p\u003e\u003c\/o:p\u003eTemp measurements are critical in helping you make decisions around ventilation, air movement, lighting wattages and other heating and cooling sources in your environment  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLCD Temperature display\u003c\/li\u003e\n\u003cli\u003eCan be switched between C° and F°\u003c\/li\u003e\n\u003cli\u003eExternal probe can be placed remotely to take measurements inside grow tents, under heat mats, reservoirs and more\u003c\/li\u003e\n\u003cli\u003eBatteries included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":43616378445,"sku":"9325136042009","price":8.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/SmallDigitalTemperatureThermometer-Aquaone_2.png?v=1731724611"},{"product_id":"airline4mmtubing5metrepack","title":"Air Line 4mm Tubing 5 Metre Pack","description":"\u003cp\u003eEnhance your hydroponic or aquarium setup with our \u003cspan\u003econvenient\u003c\/span\u003e 4mm PVC air line tubing 5 metre pack, designed specifically for connecting air stones to air pumps. This durable PVC tubing ensures optimal airflow and efficient oxygen delivery to your plants or aquatic life, promoting healthier growth and vibrant ecosystems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMade from high quality PVC, our air line is flexible enough for easy installation while remaining robust to withstand wear and tear\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4mm diameter is compatible with most air stones and pumps, making it a versatile choice \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEngineered to minimize kinks and blockages, this air line guarantees a steady flow of oxygen\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":5060699160612,"sku":"9325136060744","price":7.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirLine4mmTubing5MetrePack_5efe84ac-a847-441a-8bcc-ea4a36001a53.png?v=1729375269"},{"product_id":"air-line-tube-hose-check-valve","title":"Air Line Tube - Hose Check Valve","description":"\u003cp\u003e Air line Check Valves are a crucial component in any hydroponic or aeroponic system, designed to ensure the smooth and efficient flow of air from your air pump to your reservoir or grow pots \u0026amp; plants. This small but essential valve prevents backflow, allowing air to flow in only one direction. This stops any nutrient solution, water, or liquid from flowing back into the air pump, ensuring your system remains fully functional.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInlet and Outlet connection is 4mm suitable for 4mm tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt is even more important to ensure a check valve is used whenever an air pump is positioned at or below the waterline of a reservoir. Stay safe with an Airline Check Valve, inexpensive, easy and convenient to install\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":5060699717668,"sku":"9325136110319","price":3.3,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirLineHoseCheckValve.png?v=1730502850"},{"product_id":"airlinesilicontubing4mmpermetre","title":"Air Line Silicon Tubing 4mm Per Metre","description":"\u003cp\u003eEnhance your hydroponic or aquarium setup with our high grade super flexible 4mm silicon air line tubing, designed specifically for connecting air stones to air pumps. This durable tubing ensures optimal airflow and efficient oxygen delivery to your plants or aquatic life, promoting healthier growth and vibrant ecosystems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMade from high quality silicon, our air line is super flexible for easy installation while remaining robust to withstand wear and tear\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4mm diameter is compatible with most air stones and pumps, making it a versatile choice \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEngineered to minimize kinks and blockages, this air line guarantees a steady flow of oxygen\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":5060700176420,"sku":"9325136003048","price":2.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirLineSiliconTubing4mmPerMetre.png?v=1716266802"},{"product_id":"air-stone-12inch-300mm-2-litres-minute-output-aquaone","title":"Air Stone 12inch - 300mm - 2 Litres \/ Minute Output - Aquaone","description":"\u003cp\u003eBoost oxygen levels and enhance the health of your plants and aquatic life with our quality air stones. Ideal for both hydroponics and aquarium systems, this essential tool ensures efficient aeration, promoting vibrant growth and a thriving ecosystem. Ensuring optimal oxygen levels in your reservoir and nutrient solution during warmer months, as higher temperatures can decrease the amount of dissolved oxygen in the water. Keeping the solution well aerated helps maintain healthy conditions for your plants\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur air stone creates a fine mist of bubbles that increases the surface area for oxygen exchange, ensuring optimal oxygen saturation for plants and fish\u003c\/li\u003e\n\u003cli\u003ePerfect for hydroponic setups and aquariums, this air stone is designed to meet the needs of various applications, providing vital support for both plant roots and aquatic life\u003c\/li\u003e\n\u003cli\u003eMade from quality materials, our air stone is built to last, withstanding continuous use in both fresh and saltwater environments\u003c\/li\u003e\n\u003cli\u003eSimply connect the air stone to your air pump with a standard air line, and watch as it transforms your system's oxygenation efficiency\u003c\/li\u003e\n\u003cli\u003eInlet connection is 4mm suitable for 4mm tubing\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003eTo ensure best performance, use an air pump with a minimum output of 2 litres per minute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eImprove your hydroponic or aquarium system and experience the benefits of improved aeration for a flourishing environment\u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":5060701388836,"sku":"9325136002478","price":5.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirStone12inch-300mmAquaone.png?v=1729371389"},{"product_id":"air-stone-4inch-100mm-1-litre-minute-output-aquaone","title":"Air Stone 4inch - 100mm - 1 Litre \/ Minute Output - Aquaone","description":"\u003cp\u003eBoost oxygen levels and enhance the health of your plants and aquatic life with our quality air stones. Ideal for both hydroponics and aquarium systems, this essential tool ensures efficient aeration, promoting vibrant growth and a thriving ecosystem. Ensuring optimal oxygen levels in your reservoir and nutrient solution during warmer months, as higher temperatures can decrease the amount of dissolved oxygen in the water. Keeping the solution well aerated helps maintain healthy conditions for your plants\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur air stone creates a fine mist of bubbles that increases the surface area for oxygen exchange, ensuring optimal oxygen saturation for plants and fish\u003c\/li\u003e\n\u003cli\u003ePerfect for hydroponic setups and aquariums, this air stone is designed to meet the needs of various applications, providing vital support for both plant roots and aquatic life\u003c\/li\u003e\n\u003cli\u003eMade from quality materials, our air stone is built to last, withstanding continuous use in both fresh and saltwater environments\u003c\/li\u003e\n\u003cli\u003eSimply connect the air stone to your air pump with a standard air line, and watch as it transforms your system's oxygenation efficiency\u003c\/li\u003e\n\u003cli\u003eInlet connection is 4mm suitable for 4mm tubing\u003c\/li\u003e\n\u003cli\u003eTo ensure best performance, use an air pump with a minimum output of 1 litre per minute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eImprove your hydroponic or aquarium system and experience the benefits of improved aeration for a flourishing environment\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":5060703060004,"sku":"9325136002454","price":2.4,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirStone4inch-100mmAquaone.png?v=1729371245"},{"product_id":"air-stone-50mm-round-ball-25-litres-minute-output-aquaone","title":"Air Stone 50mm Round Ball - 2.5 Litres \/ Minute Output - Aquaone","description":"\u003cp\u003eBoost oxygen levels and enhance the health of your plants and aquatic life with our quality air stones. Ideal for both hydroponics and aquarium systems, this essential tool ensures efficient aeration, promoting vibrant growth and a thriving ecosystem. Ensuring optimal oxygen levels in your reservoir and nutrient solution during warmer months, as higher temperatures can decrease the amount of dissolved oxygen in the water. Keeping the solution well aerated helps maintain healthy conditions for your plants\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur air stone creates a fine mist of bubbles that increases the surface area for oxygen exchange, ensuring optimal oxygen saturation for plants and fish\u003c\/li\u003e\n\u003cli\u003ePerfect for hydroponic setups and aquariums, this air stone is designed to meet the needs of various applications, providing vital support for both plant roots and aquatic life\u003c\/li\u003e\n\u003cli\u003eMade from quality materials, our air stone is built to last, withstanding continuous use in both fresh and saltwater environments\u003c\/li\u003e\n\u003cli\u003eSimply connect the air stone to your air pump with a standard air line, and watch as it transforms your system's oxygenation efficiency\u003c\/li\u003e\n\u003cli\u003eInlet connection is 4mm suitable for 4mm tubing\u003c\/li\u003e\n\u003cli\u003eTo ensure best performance, use an air pump with a minimum output of 2.5 litres per minute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eImprove your hydroponic or aquarium system and experience the benefits of improved aeration for a flourishing environment\u003co:p\u003e\u003c\/o:p\u003e\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":5060704436260,"sku":"9325136017915","price":4.4,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirStone50mmRoundBallAquaone_4bee9d79-d6d7-44e6-a42a-da1333f6263a.png?v=1730502874"},{"product_id":"air-stone-6inch-150mm-12-litres-minute-output-aquaone","title":"Air Stone 6inch - 150mm - 1.2 Litres \/ Minute Output - Aquaone","description":"\u003cp\u003eBoost oxygen levels and enhance the health of your plants and aquatic life with our quality air stones. Ideal for both hydroponics and aquarium systems, this essential tool ensures efficient aeration, promoting vibrant growth and a thriving ecosystem. Ensuring optimal oxygen levels in your reservoir and nutrient solution during warmer months, as higher temperatures can decrease the amount of dissolved oxygen in the water. Keeping the solution well aerated helps maintain healthy conditions for your plants\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur air stone creates a fine mist of bubbles that increases the surface area for oxygen exchange, ensuring optimal oxygen saturation for plants and fish\u003c\/li\u003e\n\u003cli\u003ePerfect for hydroponic setups and aquariums, this air stone is designed to meet the needs of various applications, providing vital support for both plant roots and aquatic life\u003c\/li\u003e\n\u003cli\u003eMade from quality materials, our air stone is built to last, withstanding continuous use in both fresh and saltwater environments\u003c\/li\u003e\n\u003cli\u003eSimply connect the air stone to your air pump with a standard air line, and watch as it transforms your system's oxygenation efficiency\u003c\/li\u003e\n\u003cli\u003eInlet connection is 4mm suitable for 4mm tubing\u003c\/li\u003e\n\u003cli\u003eTo ensure best performance, use an air pump with a minimum output of 1.2 litres per minute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eImprove your hydroponic or aquarium system and experience the benefits of improved aeration for a flourishing environment\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":5060704993316,"sku":"9325136002461","price":3.2,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirStone6inch-150mmAquaone.png?v=1729371344"},{"product_id":"air-pump-large-replacement-diaphragm-pack-of-2-for-800-litre-4-outlet-unit","title":"Air Pump Large Replacement Diaphragm Pack of 2 (For 800 Litre 4 outlet unit)","description":"\u003cp\u003eAir Pump Large Replacement Diaphragm Pack of 2 (For 800 Litre 4 outlet unit)\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":31717802082340,"sku":"9325136000283","price":8.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirPumpLargeReplacementDiaphragmPackof2.png?v=1734823893"},{"product_id":"air-pump-small-replacement-diaphragm-pack-of-2-for-160-360-litre-unit","title":"Air Pump Small Replacement Diaphragm Pack of 2 (For 160 \u0026 360 Litre unit)","description":"\u003cp\u003eAir Pump Small Replacement Diaphragm Pack of 2 (For 160 \u0026amp; 360 Litre unit)\u003c\/p\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":31717802115108,"sku":"9325136000276","price":6.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirPumpSmallReplacementDiaphragmPackof2.png?v=1734823868"},{"product_id":"air-line-silicon-tubinair-line-silicon-tubing-4mm-100-metre-rollg-4mm-100-metre-roll","title":"Air Line Silicon Tubing 4mm 100 Metre Roll","description":"\u003cp\u003eEnhance your hydroponic or aquarium setup with our high grade super flexible 4mm silicon air line tubing 100 metre roll, designed specifically for connecting air stones to air pumps. This durable tubing ensures optimal airflow and efficient oxygen delivery to your plants or aquatic life, promoting healthier growth and vibrant ecosystems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMade from high quality silicon, our air line is super flexible for easy installation while remaining robust to withstand wear and tear\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4mm diameter is compatible with most air stones and pumps, making it a versatile choice \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEngineered to minimize kinks and blockages, this air line guarantees a steady flow of oxygen\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aquaone","offers":[{"title":"Default Title","offer_id":40331284873252,"sku":"AT4ROLL","price":145.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/files\/AirLineSiliconTubing4mm100MetreRoll.png?v=1729371181"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1918\/8941\/collections\/aquaone_logo.png?v=1774403120","url":"https:\/\/growshop.co.nz\/collections\/aquaone\/powerboards-leads.oembed","provider":"growshop.co.nz","version":"1.0","type":"link"}